tray_182005 Member 1,226 Member For: 15y 4m 17d Gender: Male Location: Wee Waa/NSW Posted 06/12/09 03:49 AM Share Posted 06/12/09 03:49 AM Thank Mic,I have been down that path before, this was not required with my current combo, the turbo will run out of puff before any of these things become an issue! I spin the street tune to 6850 and the race tune to 7200 with no drama's, the engine has done over 60K with over 400+rwkw's at these rpm levels, and I might add that it is performing flawlessly! (For now)On a different note I have another engine combo currently in the making, it will be ready for January 2010, it will spin to 9000rpm, it has solid roller, solid lifters & rockers, it will run an 88mm Precision Billet turbo, it will be dry sumped, and it will make 1000rwkw's!! And before you all ask me the same question YES it will be a street engine going in to the F6. I do not want to divulge any more at this stage and I will be starting a different thread about this after new years. I am busy focusing on this 10sec pass for now, surely you all understand!!CheersSpikoU gotta love the billet turbos. one question 6 or 8 ? Link to comment Share on other sites More sharing options...
SPIKO Gold Donating Members 1,924 Member For: 19y 8m 18d Gender: Male Posted 06/12/09 03:55 AM Author Share Posted 06/12/09 03:55 AM U gotta love the billet turbos. one question 6 or 8 ?BA Ford 6 cyl buddy, nothing else! Link to comment Share on other sites More sharing options...
tray_182005 Member 1,226 Member For: 15y 4m 17d Gender: Male Location: Wee Waa/NSW Posted 06/12/09 03:57 AM Share Posted 06/12/09 03:57 AM Yer I no Link to comment Share on other sites More sharing options...
rhys86 Donating Members 443 Member For: 17y 11m 25d Gender: Male Location: Wollongong Posted 06/12/09 07:25 AM Share Posted 06/12/09 07:25 AM What parts have you used in your current motor? ie rods pistons, oil pump gears etc etc. Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 14d Gender: Male Location: Loitering in SEQ Posted 06/12/09 08:37 AM Share Posted 06/12/09 08:37 AM I love ya work spiro, ya making us all look like amateurs though. lol.Good luck with turning the whick up with this setup will be waiting to hear how it goes. We're gonna screw mine this week as well so it should hopefully livin this place up abit hopefully. Link to comment Share on other sites More sharing options...
Brandonn Donating Members 2,304 Member For: 16y 3m 10d Gender: Male Location: port hedland Posted 06/12/09 09:09 AM Share Posted 06/12/09 09:09 AM I love ya work spiro, ya making us all look like amateurs though. lolI know the feeling Link to comment Share on other sites More sharing options...
SPIKO Gold Donating Members 1,924 Member For: 19y 8m 18d Gender: Male Posted 06/12/09 09:28 AM Author Share Posted 06/12/09 09:28 AM (edited) Nothing wrong with a bit of livening I am sure you all agree!John & Brandon you builds are a credit to you guy's and I am sure you will achieve your goals, as you know I am here to help, this I have proven in the past and will continue to do in the future!To be fair I have been at it a little longer than most, and I was always going to pick up where I left off, at the end of the day any R&D that I do benefits all in the end, the only time I keep certain things to myself is during the build, after I have achieved whatever I set out to do I have been known to share fella's!This other engine has been a very long time in the planning, it is not a recent idea!Nearly forgot Rhys86 the current engine was built 4 years ago, to the best of my recolection it runs Argo rods, SRP or JE pistons a girdle, race barings, billet oil pump gears and atomic race valve springs!Cheers Edited 06/12/09 09:36 AM by SPIKO Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 14d Gender: Male Location: Loitering in SEQ Posted 06/12/09 09:33 AM Share Posted 06/12/09 09:33 AM that's what its all about mate, if anyone can take something away from your experiences it all worth it. All I can do is congratulate you for having a crack & taking it to the next level. When its done I'm drivin down to have a look that's for sure. But for now we all want to see what you have up ya sleeve for this animal which im sure will more than drop a few jaws & more importantly put a smile on ya face. Link to comment Share on other sites More sharing options...
CV PERFORMANCE Senior Member Member 139 Member For: 18y 4m 14d Gender: Male Location: Caringbah 9526-5322 Posted 07/12/09 01:36 AM Share Posted 07/12/09 01:36 AM Thank Mic,I have been down that path before, this was not required with my current combo, the turbo will run out of puff before any of these things become an issue! I spin the street tune to 6850 and the race tune to 7200 with no drama's, the engine has done over 60K with over 400+rwkw's at these rpm levels, and I might add that it is performing flawlessly! (For now)On a different note I have another engine combo currently in the making, it will be ready for January 2010, it will spin to 9000rpm, it has solid roller, solid lifters & rockers, it will run an 88mm Precision Billet turbo, it will be dry sumped, and it will make 1000rwkw's!! And before you all ask me the same question YES it will be a street engine going in to the F6. I do not want to divulge any more at this stage and I will be starting a different thread about this after new years. I am busy focusing on this 10sec pass for now, surely you all understand!!CheersSpikoWith out sounding to self-assured, I think Spiro is being a bit modest when saying it is going to make 1000rwkw... :-) Kind regards CV Performance Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 10m 18d Gender: Male Location: SW Sydney Posted 07/12/09 02:04 AM Share Posted 07/12/09 02:04 AM All I can say is Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now