60' Vs Qtr Times

[Muncha]

Hello all,

I am currently looking at getting a XR6T in the next few months, just wondering what kind of 60' times people are doing and how it compares to you 1/4 time.

I have noticed that some 6t's are normally a little bit slower in the 60' compared to other cars and was wondering why?

What kind of tyres are you guys using? MT radials? Slicks? Street rubber?

Thanks in advance,

Cary.

[JETURBO]

I race a 60ft at a time

[qik1]

I did a 11.3 with a lowly 1.91 60ftr. reason being the zf's dont have a stall & can be bit tricky to launch especially since with too much pressure you an lunch the tailshaft. There has been some 1.6 & up abit but usually need a sensational track. Mine was done at townsville on mt's in the middle of last summer. Good track for doin skids. lol.

[blueboost]

13 sec 101mph car 1.9 60ft

12 sec car 110mph 1.8 60ft

when it was a 11sec car it ran 11.7 @ 114mph 1.68 60ft

when it was high 10 sec car 10.95 @124mph 1.59 60ft

when it was a low 10sec car 10.44 132mph 1.45 60ft

high nine sec car 137mph 1.39 60ft

then 9.43 at 146mph 1.36 60ft

David

Edited 26/10/09 09:11 PM by blueboost

[ETM]

I ran a 10.45 132mph with a 1.58 60'

[FPV_Steve]

Hi mate. BA 4sp auto, 2800 stall

308rwkw = 12.7 @ 115mph 2.05 60ft on 225 20" Nexen N3000's.

318rwkw = 11.4 @ 121mph 1.59 60ft on 245 16" MT et's.

Edited 27/10/09 06:12 AM by FPV_Steve

[JETURBO]

fpv steve how high did u manage to stall for the 1.59?

[Muncha]

Thanks for the input guys.

Im guessing most of them are auto?

Edited 27/10/09 07:01 AM by Muncha

[FPV_Steve]

fpv steve how high did u manage to stall for the 1.59?

Hi mate, using the handbrake I could get it up over 3000rpm, bout 3100.

[JETURBO]

yeh I was wondering I managed 3100 by footbrake but didnt have the balls to grab the handbrake but I got told I should of interesting u reckn it would of gone further?

bet that launch felt increadable hey