whistler6 Member 417 Member For: 17y 8m 7d Gender: Male Location: VIC Posted 26/10/09 02:57 AM Share Posted 26/10/09 02:57 AM Hi guys,Was installing an ignition wire for my oil pressure gauge just then, took ICC out.Put the ICC back in & now it doesn't work, no audio or climate control & now my rev meter & coolant gauges in the dash are not working.There's also an ETC and coolant light on.There was a blown 3A fuse in the fuse panel inside the car....Any ideas on what I can do???Car starts/drives like it did before.Tried pulling ICC out and connecting again, disconnect-reconnect battery to no avail. Link to comment https://www.fordxr6turbo.com/forum/topic/63043-icc-dash-problem/ Share on other sites More sharing options...
whistler6 Member 417 Member For: 17y 8m 7d Gender: Male Location: VIC Posted 26/10/09 03:34 AM Author Share Posted 26/10/09 03:34 AM Checked to see if any pins were bent or broken but they're fine.Checked all fuses & replaced that 3A fuse that was blown.Disconnected & reconnected battery again.Lights, fuel gauge, speedo still work, car drives fine!Any other ideas? Link to comment https://www.fordxr6turbo.com/forum/topic/63043-icc-dash-problem/#findComment-947220 Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 9m 13d Gender: Male Location: Victoria Posted 26/10/09 06:20 AM Share Posted 26/10/09 06:20 AM LOL ringworm??? Link to comment https://www.fordxr6turbo.com/forum/topic/63043-icc-dash-problem/#findComment-947253 Share on other sites More sharing options...
turbo.vixen Hey guys, Tab is here... Oh i feel sick Lifetime Members 8,459 Member For: 16y 11m 13d Gender: Male Location: sunshine coast Posted 26/10/09 06:26 AM Share Posted 26/10/09 06:26 AM did you plug all the wires back into the bottom of the icc? Link to comment https://www.fordxr6turbo.com/forum/topic/63043-icc-dash-problem/#findComment-947255 Share on other sites More sharing options...
whistler6 Member 417 Member For: 17y 8m 7d Gender: Male Location: VIC Posted 26/10/09 07:34 AM Author Share Posted 26/10/09 07:34 AM Yep plugged them all back in.Rang ASL, they said it might not be plugged in properly at the back of the ICC. Took the ICC out again, turns out one of the plastic clips that holds the 3 white connectors behind the ICC is broken. The whole thing moves back & forth, that's probably why its not plugging in properly.Will have to take it to ASL to get it fixed! Link to comment https://www.fordxr6turbo.com/forum/topic/63043-icc-dash-problem/#findComment-947304 Share on other sites More sharing options...
smicky Go Pies!!! Donating Members 2,852 Member For: 17y 2m 19d Gender: Male Location: Vic Somewhere - Sometimes NSW Posted 26/10/09 01:38 PM Share Posted 26/10/09 01:38 PM dont pull things... sorry dont pull things apart..good luck mate! Link to comment https://www.fordxr6turbo.com/forum/topic/63043-icc-dash-problem/#findComment-947439 Share on other sites More sharing options...
zayd687 Member 74 Member For: 15y 3m 25d Posted 19/01/10 09:29 AM Share Posted 19/01/10 09:29 AM BUMPim having this same problem.... did you guys find out the soloution??????was it the board or the white connector? Link to comment https://www.fordxr6turbo.com/forum/topic/63043-icc-dash-problem/#findComment-972511 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now