Mastika Member 47 Member For: 15y 2m 11d Posted 21/10/09 03:05 AM Share Posted 21/10/09 03:05 AM Sounds good, thanks for the info and congratz on the system Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 3m 13d Gender: Male Location: Broady, Melbourne Posted 21/10/09 03:27 AM Share Posted 21/10/09 03:27 AM Going from a factory "hi-flowed" system to an XForce 3.5 inch S/S with split dump, power came on about 300-400rpm earlier. From memory, it made about 25rwkw more on 1psi or so less boost and 35rwkw more with the same boost. Bolted up without a retune it made an extra 18rwkw. Link to comment Share on other sites More sharing options...
DK777 Member 44 Member For: 15y 7m 28d Gender: Male Location: Northside Brisbane Posted 21/10/09 09:53 AM Author Share Posted 21/10/09 09:53 AM Sooo... is it necessary to get a retune after the exhaust is installed... none of my engiine lights come on etc... will she be boost spiking alot? ive got a tune at the moment previous to the exhaust on 9psi making 350rwhp...plans are to get my 60lb injectors in, buy a surge tank, and get my retune n with my mods hitorque rekin they can get me to 350rwkw maybe more Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 3m 13d Gender: Male Location: Broady, Melbourne Posted 21/10/09 11:34 AM Share Posted 21/10/09 11:34 AM You should have it done ASAP but you don't have to get a retune to drive it. Keep right off it until you get to your tuner. Link to comment Share on other sites More sharing options...
DK777 Member 44 Member For: 15y 7m 28d Gender: Male Location: Northside Brisbane Posted 21/10/09 12:45 PM Author Share Posted 21/10/09 12:45 PM lol mayb that's why the the silcon joiner at the throttle body blew off haha mmm thort sooo... looks like ill be driving like a granny for a bit... Link to comment Share on other sites More sharing options...
STYLZEE Member 75 Member For: 16y 6m 2d Posted 12/11/09 12:23 AM Share Posted 12/11/09 12:23 AM I have 4" stainless dump with 3.5" stainless right through.. Sounds great and performance and responce is also really good id go straight for the 4" Link to comment Share on other sites More sharing options...
Rudiger All round good guy! Lifetime Members 1,122 Member For: 16y 6m 22d Gender: Male Location: Greenvale, Victoria Posted 13/11/09 04:46 PM Share Posted 13/11/09 04:46 PM I am looking at the following ;-XFORCE 3.5 INCH TURBO BACK EXHAUST SYSTEM WITH 4" DUMP PIPE AND 3.5" HI FLOW METAL CAT * * FULL STAINLESS After this im getting a tune and other bits.The price I have is $1540 not fitted.Is this the recommended system? Is this too high for non fitted? Nizpro etc sell these for around the $2k mark don't they? Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 3m 13d Gender: Male Location: Broady, Melbourne Posted 13/11/09 08:09 PM Share Posted 13/11/09 08:09 PM (edited) If you never intend to take that system above it's capabilities, which would be well over 400rwkw, then you could save a few hundy. Otherwise, spend the extra money on the Nizpro system now and save some money in the future. The only thing that would be stopping me from getting the Nizpro system is that I haven't heard much feedback about it. Plenty of people have used the XForce systems including myself. There is nothing wrong with them. They last, the cats do not fail early and the welds do not crack. They are thinner and lighter than other exhausts which means they can sound a bit tinnier, especially on startup, but they are also lighter. Yes they can and usually do have fitment issues but none that can't be sorted. That price sounds reasonable. Edited 13/11/09 08:10 PM by straughsberry Link to comment Share on other sites More sharing options...
6BOOST Gold Donating Members 139 Member For: 16y 10m 8d Gender: Male Posted 17/11/09 10:51 AM Share Posted 17/11/09 10:51 AM Why is everyone going so big in the exhaust?? I'm not sure if the fpv's have a better exhaust, but my tornado with process west stage 1 cooler and ubp, 60lb injectors, hiflow cat and tune makes 314rwkw and backed it up with a 11.9@116.8mph first pass. I have no doubt it would happily make 350rwkw with the centre mufflers removed and an actuator to hold more than 10psi past 3000rpm. Bigger isn't always better, a combination of matched parts can yield good results for little money Cheers...............6BOOST Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 2m 28d Gender: Male Location: Townsville Posted 17/11/09 05:35 PM Share Posted 17/11/09 05:35 PM Why not go straight for a decent setup from the start, you can spend anywhere up to $600 just for a cat fitted and everyone always wants more power plus a free flow exhaust reduces strain on the rest of the system and sounds better if your into that kind of thing!Its the whole debate like standard injector will do such and such kw's but at what cost to the system...If your on a budget and are planning on only having so many kw's then a cat may be fine but I'd say if your buying all those other parts that handle so much more then do it once (for now). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now