My_XR6_Turbo Member 282 Member For: 20y 3m 13d Posted 27/09/09 11:36 AM Share Posted 27/09/09 11:36 AM This is what the kit consists of. 4 Lights and 2 power injectors.First thing to do is remove the front bar. Undo the plastic screws and the 2 bolts under the plastic cover. You will also need to undo the screws in the wheel arch. Now carefully pull the bar off stating from wheel arch and pulling outwards.Unplug the spotlights and put the bar away.Remove the indicator plug from the headlight assembly by twisting.Undo the 4 bolts holding the headlight assembly to the body. Carefully pull forward and remove the plugs connecting to the high/low beam and parker lights.With the assembly out remove the globes and rubber dust covers.Now the fun bit. Turn oven on to 200degLeave to warm upTurn oven offPut light assembly in oven on a piece of wood. Don’t let the assembly touch the oven!!!Leave for 5-7minsWearing gloves pull the assembly from the oven and start pulling it apart starting from the pointy end. You may need to use a screw driver to lift the tabs up. It will be VERY tight. Just take you time and PULLLLLLLL. Once apart let the glue cool down. Take care not to smudge the glue.Using a T20 bit undo the 2 screws joining the lens to the inner assembly.Carefully remove the tab on the smaller globe. I removed the long plastic bar on the larger globe purely for cosmetics. Be very careful if you do remove the bar as it stops the globe from bending and snapping.I used acid free silicon to secure the globes to the chrome surrounds. DO NOT USE MASKING TAPE TO HOLD THE GLOBE TO THE CHROME. IT WILL PEEL THE CHROME OFF.Pass the cables through the back of the assembly.Before screwing the Lens back to the assembly I used cotton wool to clean any finger prints off the inner chrome and black plastic. Pass the wire through the globe holeTo put the assembly back together I used picture frame clamps. It worked a treat. Once it was clamped together I used the girlfriends hairdryer to heat up each section and pushed it together. Make sure the tabs are pushed over the notch.I hooked up my angel eyes to my parker lights. I simply cut the wires and joined them together. Brown being + and black being -. I also put heat shrink over the joins. I then cable tied the box to the other cables to keep everything tidy.Put everything back together in the reverse order.For anyone that is interested in purchasing the angel eyes pm Gr8xr6 for a good price.Thanks mate. 2 Link to comment Share on other sites More sharing options...
PSIFRK Member 312 Member For: 17y 10m 5d Gender: Male Location: Brisbane Posted 27/09/09 12:19 PM Share Posted 27/09/09 12:19 PM care to do mine mate haha, looks great I want to do the same to mine just haven't had the money to sent off another set of lights.how much was the angel lights kit??? Link to comment Share on other sites More sharing options...
GR8XR6 ANGEL EYES Silver Donating Members 1,683 Member For: 16y 3m 24d Gender: Male Location: SE Suburbs, Melbourne Posted 27/09/09 01:02 PM Share Posted 27/09/09 01:02 PM Nice work shawn and awesome write-up! I'm looking forward to getting mine installed in the next month or so! I am also hoping to get these in for around $50 - $65 a set plus postage. Depends on exchange rate! Post up your interest and maybe PM me or maybe I can setup a group buy if there is enough interested in these great looking mod for our cars! This write-up should get a sticky IMO! Link to comment Share on other sites More sharing options...
My_XR6_Turbo Member 282 Member For: 20y 3m 13d Posted 27/09/09 01:07 PM Author Share Posted 27/09/09 01:07 PM Thanks mate. Link to comment Share on other sites More sharing options...
winter bft Member 56 Member For: 16y 4m 19d Gender: Male Location: melbourne Posted 01/10/09 10:11 AM Share Posted 01/10/09 10:11 AM I'll be in for a group buy!!! looks really good. Link to comment Share on other sites More sharing options...
GR8XR6 ANGEL EYES Silver Donating Members 1,683 Member For: 16y 3m 24d Gender: Male Location: SE Suburbs, Melbourne Posted 01/10/09 12:42 PM Share Posted 01/10/09 12:42 PM (edited) Will see how much interest there is! I will be placing an order in a couple of weeks anyway! PM me if seriously interested and I'll keep you in the loop if I don't post up a group buy!I can get other colours and other models of cars too! Edited 01/10/09 12:43 PM by GR8XR6 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 21d Gender: Male Location: Probably above atmospheric pressure Posted 02/10/09 10:37 AM Share Posted 02/10/09 10:37 AM +1 for group buy! Something to make me do my tax return hahaha... 1 Link to comment Share on other sites More sharing options...
AGENT ORANGE F6 Phoon ----- MISH!! Member 348 Member For: 17y 8m 24d Gender: Male Location: BRISBANE Posted 02/10/09 03:10 PM Share Posted 02/10/09 03:10 PM Ps don't do what he has done gluing them on the chrome rings looks ultra un factory an they don't sit right doesn't look as good IMO Link to comment Share on other sites More sharing options...
My_XR6_Turbo Member 282 Member For: 20y 3m 13d Posted 02/10/09 09:50 PM Author Share Posted 02/10/09 09:50 PM How are you going to hold them on? Link to comment Share on other sites More sharing options...
AGENT ORANGE F6 Phoon ----- MISH!! Member 348 Member For: 17y 8m 24d Gender: Male Location: BRISBANE Posted 03/10/09 12:21 AM Share Posted 03/10/09 12:21 AM (edited) I did mine bout 6 months ago I'll post up a pic the sarv when I'm home the sarv your write up is good but can be finished off better I'll post up the fg lights I just did aswell as my bf f6 Edited 03/10/09 12:22 AM by AGENT ORANGE Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now