Jump to content

Xr6 Turbo Issues...Help Needed


cranners

Recommended Posts

  • Member
  • Member For: 15y 10m 28d

Good Afternoon all,

Got a issue with the XR, its running like a bag of sh*t at idel and similar once in drive....

Sounds like its got a really lumpy cam and lacks power once in drive...

Any ideas??

I have replaced the spark plugs, and had it on a comp which said the 6th coil had an error, so I replaced that too, but still no change.

When it runs bad I turn it off and continue to drive normally for ages, then it cuts back in again..

Thanks

Cranners

Link to comment
Share on other sites

  • Donating Members
  • Member For: 15y 4m 11d
  • Gender: Male
  • Location: Wellington New Zealand

A question asked many times. My BA had all the same issues and at its worst would have been eaten by the average shopping trolley.

Plugs...not sure which ones you used but they need to be gapped to 0.8mm NOT 1.1mm as many come gapped at in the box.

Aside from that mine improved one step at a time.

Fuel filter made a difference.

Throttle body clean took away the tendency to surge and hunt.

Boost solenoid clean fixed much of the lack of power.

Working through every boost and vacume hose identified many that were a little worse for wear and/or seriously loose.

Just some options though there are plenty more.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • Member
  • Member For: 15y 10m 28d

Re-gapped my plugs last night from 1.1 to 0.8 and the car is still running as bad...

It has to be electrical because it kind of runs fine and then starts playing up...pull over turn it off and back on and fine again...

Really has me and a few mechinicly minded friends puzzled..

Link to comment
Share on other sites

  • Member
  • Member For: 16y 7m 10d
  • Gender: Male
  • Location: The Ville

chat to millers he had this issue we did a ton of testing turned out to be fuel pump. yes his was off and on pull over turn it off and back on and it was fine.

Link to comment
Share on other sites

  • Member
  • Member For: 15y 10m 28d

Thanks for the reply guys, ended up being a loose loom under the computer!

So got that all fixed and now she is running fine! :D

Re gapped my plugs to 0.8 as well and its running great :D

Getting my exhaust on thursday, injectors and valve springs the following week, then saving for my process west gear..

Cranners

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'