Jump to content

Getting The Guards Pumped!


TORN8O

Recommended Posts

  • Member
  • Member For: 17y 9m 20d
  • Gender: Male
  • Location: sydney

hey guys after dropping the ute even more the tyres were starting 2 rub and I didnt want 2 lose the 295's I was wearing so dropped it off 2 Angelo at cool customs and said do your magic. now ive got 5mm spacers on the rear and the 295's and ive got heaps of room 2 play with now. let me know what u guys think. cheers post-11918-125231090958_thumb.jpgpost-11918-125231092404_thumb.jpgpost-11918-125231094014_thumb.jpgpost-11918-125231095421_thumb.jpgpost-11918-125231096935_thumb.jpgpost-11918-125231098478_thumb.jpg

Link to comment
Share on other sites

  • Member
  • Member For: 17y 9m 20d
  • Gender: Male
  • Location: sydney

set me back $1200, I couldnt find any1 2 roll the rear guards for me because they are double lipped.and I heard about Angelo so I thought id give him a go. he told me he had 2 spray the rear quaters n tailgate so I said fill the holes in while your at it.he did a great job

Link to comment
Share on other sites

  • Legendary member!!
  • Donating Members
  • Member For: 18y 1m 19d
  • Gender: Male
  • Location: Dianella, West Oz

Looks BOMB!

U find anything scrapes being that low?

Is the $1200 including what it cost to drop the back again/reset rear leafs??

Link to comment
Share on other sites

  • Member
  • Member For: 17y 9m 20d
  • Gender: Male
  • Location: sydney

Looks BOMB!

U find anything scrapes being that low?

Is the $1200 including what it cost to drop the back again/reset rear leafs??

nah its sitting a lil lower in the rear because of the driveway but its about an inch higher then in the pic. now nothing scrapes,I put 5mm spacers on because on some driveways it would scrape on the inside so now ive got a lil bit more clearance. yeh was a great price I think,he had 2 do the tailgate because of the torneau (check spelling) holes.

Edited by TORN8O
Link to comment
Share on other sites

  • The Cleaning Dudes Ute
  • Silver Donating Members
  • Member For: 18y 11m 1d
  • Gender: Male
  • Location: Bentleigh, Vic, Australia

Whats exactly involved in pumping out guards?

I've got a set of 10.5" rims on my ute with a +42 offset. - Have to run skinny rubber on them because the inner clearance is next to nothing.

If a +22 offset fits over the rear brakes you'd be able to fit 305+ on the back.

BTW... Awesome looking ute.

Might need to drop the front a little more now lol :spoton:

Link to comment
Share on other sites

  • Member
  • Member For: 17y 9m 20d
  • Gender: Male
  • Location: sydney

yeh I had stuff all inner clearance that's y I got some spacers 2 the guy doing the work after I burn these tyres ill try a wider set. and your right the front does need 2 drop a lil bit,lucky ive got some coilovers up front 4 that. ill have 2 organise it through senna (pat) who helped me out when I wanted 2 drop the rear some more.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'