Jump to content

Who Has Fitted A Fpv Steering Wheel


Recommended Posts

  • Donating Members
  • Member For: 16y 6m 29d
  • Gender: Male
  • Location: New Zealand, Palmerston North

Just lastnight brought on of trademe for $375nzd and was now wondering how much of a mission it is to fit... I assume theres screws behind it and pretty much just keep taking stuff off until my old wheel comes off..?

Any advise/tips would be much appreciated.

Thanks Ben

Link to comment
Share on other sites

  • Lifetime Members
  • Member For: 21y 9m 13d
  • Gender: Male
  • Location: Melbourne

Yes mate you will need a torx bit to remove the wheel. please make sure you disconnect the battery and turn on your headlights to discharge any remaining current otherwise you may wear an unwanted airbag to the face.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 15y 5m 16d
  • Gender: Male
  • Location: New Zealand

Yes mate you will need a torx bit to remove the wheel. please make sure you disconnect the battery and turn on your headlights to discharge any remaining current otherwise you may wear an unwanted airbag to the face.

sounds fun

Link to comment
Share on other sites

  • Member
  • Member For: 15y 3m 22d
  • Gender: Male
  • Location: sydney

What size torx bit do I need ? and does the shroud around the steering column need to come off as I cant see/feel and screws behind the wheel ?

Link to comment
Share on other sites

  • Member
  • Member For: 16y 9m 11d

T30 TORX BIT. Turn the steering wheel 90degrees and you will see one screw,then turn 90degrees the other way and you will see the other screw. Pull the airbag off and unplug cruise and radio switches and airbag. Loosen off t50 torx bit then wiggle steering wheel off before completly taking t50 bolt out.Hope this helps.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 5m 20d
  • Gender: Male
  • Location: north QLD

no mate it dose not need t come off.. only thing you touch is the wheel.. there are 2 screws on the back side of the wheel on either side and they are T30 size bit and the main one for the steering colum when you get the air bag off that is a T50 size bit mate..

I changed mine over a few weeks ago :beerchug:

Link to comment
Share on other sites

  • Member
  • Member For: 15y 3m 22d
  • Gender: Male
  • Location: sydney

I was going to fit a brand new FPV steering wheel this weekend but ended up selling my ute today. if anybody is interested in please email me at pendlebury@hotmail.com $400 plus about $15.00 postage. its brand new as I said.

Cheers

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'