Chasing 1000Hp

[mic]

Nah mate stock cam and lifters not real sure about how much porting if any . What did u think it would make with 30 ? not many on here have that much power with this psi

yer sure mate its lookin great and well done 4 achieving so much hp. was just saying that monster cams super heavy porting and a good lifter setup does wonders. its not odd 4 a heavily modded supra to make 1000+ on around 30psi. if u are gonna put bigger studs n all that y not go nuts on the head ?

edit, well it just goes to show how potent these engines are. not 2 many cars can make power like this with a stock head, well done agn

Edited 18/11/09 09:48 AM by mic

[straughsberry]

Cheers! But wouldn't it be a pisser if this "extra effort" counts for stuff all! I've always been a fiddler

[tray_182005]

yer sure mate its lookin great and well done 4 achieving so much hp. was just saying that monster cams super heavy porting and a good lifter setup does wonders. its not odd 4 a heavily modded supra to make 1000+ on around 30psi. if u are gonna put bigger studs n all that y not go nuts on the head ?

edit, well it just goes to show how potent these engines are. not 2 many cars can make power like this with a stock head, well done agn

Yer no offence takin . Dont no they never bort it up to go down that path . maybe becase I dont need it for a daily drive car or something.

[tray_182005]

Cheers! But wouldn't it be a pisser if this "extra effort" counts for stuff all! I've always been a fiddler

It just might will be good to see your build my show up some interesting things for future build good on u for going this far with it. Build going good and time frame yet?

[straughsberry]

Yeah the time frame is always tomorrow

But seriously the 3 or 4 things we are having to manufacture or modify highly have taken time to complete. Lots of head work. Modified Honda valves should be completed this soon. Solid lifters have just been finished this week. First bell housing cast 2 weeks ago but needs mods so that's a bit off. Head plate had to go back and forth a bit to get right etc etc. Next big thing is cam selection and dummying up motor to get the comp ratio to where we want it. check clearances et6c so we can cut the valves. We are always moving forward, just a little leisurely at times.

So what interesting stuff can you share that you've discovered?

[tray_182005]

building your dream car takes a lot of time lol and it best if u can be close to the build and have some input unlike my build was

[straughsberry]

Cool. Got it

[Xtreme F6]

Orsm effort. Is there a post that I missed with the dyno graph at all bud? WOuld like to compare it to my 624 rwkw's.

[tray_182005]

Nah mate cv is going to put it up soon

[tray_182005]

here is the dyno graph