blueboost Member 1,204 Member For: 20y 6m 26d Gender: Male Location: Mackay NorthQueensland Posted 22/08/09 09:52 PM Author Share Posted 22/08/09 09:52 PM (edited) thanks for posting that mick, and thanks a lot for the help at the track, and help getting it ready to be able to run, your a good mate. David Edited 22/08/09 09:53 PM by blueboost Link to comment Share on other sites More sharing options...
FPV_Steve Donating Members 191 Member For: 17y 7m 1d Gender: Male Location: Brisbane Posted 22/08/09 10:05 PM Share Posted 22/08/09 10:05 PM Well one Dave!!!!! That is crazy that 60ft. I did my pb 60 the other night, 1.59 and mate, that felt fast. I cant imagine the G force you felt? What rpm you leaving the line at? Well done mate!! steve Link to comment Share on other sites More sharing options...
RIPGMH Donating Members 302 Member For: 20y 5m 14d Gender: Male Location: Sydney Posted 22/08/09 10:29 PM Share Posted 22/08/09 10:29 PM Awsome result period ! Link to comment Share on other sites More sharing options...
GreenXR6T Donating Members 630 Member For: 19y 3m 20d Gender: Male Location: NSW Posted 22/08/09 10:39 PM Share Posted 22/08/09 10:39 PM Sensational. Well done. Link to comment Share on other sites More sharing options...
JP300 Donating Members 842 Member For: 19y 3m 9d Gender: Male Location: Sydney Posted 22/08/09 10:44 PM Share Posted 22/08/09 10:44 PM That is absolutely mind blowing... Top Stuff Dave.What weight is the car running? What slicks are you using. Is that still on the stock BA bottom end ? Dave, you are the man!! Link to comment Share on other sites More sharing options...
blueboost Member 1,204 Member For: 20y 6m 26d Gender: Male Location: Mackay NorthQueensland Posted 22/08/09 11:19 PM Author Share Posted 22/08/09 11:19 PM thanks,I left at 10 psi, just as it started to ramp fast. Stevethat was with a Atomic botom endwith the old gear off the other one, but the time and mph at the 660ft, was the same as when I broke the stock one, so I must have had near 500rwks coming out of that old one, through a c4 and stall so near 800hp at the motor when she poped. I weighed it last night at the drags and it went 3740lb. JP300 David Link to comment Share on other sites More sharing options...
spine Donating Members 642 Member For: 18y 8m 4d Gender: Male Location: Footscrayastan Posted 22/08/09 11:19 PM Share Posted 22/08/09 11:19 PM Is this off the footbrake? or do you have a transbrake? Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 12d Gender: Male Location: Loitering in SEQ Posted 22/08/09 11:22 PM Share Posted 22/08/09 11:22 PM Nice work dave, is there anymore in it? Link to comment Share on other sites More sharing options...
blueboost Member 1,204 Member For: 20y 6m 26d Gender: Male Location: Mackay NorthQueensland Posted 22/08/09 11:28 PM Author Share Posted 22/08/09 11:28 PM (edited) Is this off the footbrake? or do you have a transbrake?got a transbrake, but have not used it at this stage.has more in it, just sneaking up on it (learning) the standed tail shaft seems to love the 1.39 60ft. had a high power tune with me (another 30 kws)but I need to go over this info first, to be honest I thought if I had run the power I run with the 1.39 60ft, I thought it would go 9.6 its not just about throwing power at it.I done the power a bit different last night, I pulled a bit of timing out, compared to when I hurt the old one, but put more boost in, and all I can think of is with the more boost, the inlet temps might have creped up a bit and pulled to much out, (this has got just your every day Process west intercooler in it,) so I might put some timing back in and give it a go. I expected about 142mph. Edited 22/08/09 11:38 PM by blueboost Link to comment Share on other sites More sharing options...
CAT600 Member 50 Member For: 18y 9m 16d Location: Perth Posted 23/08/09 01:37 AM Share Posted 23/08/09 01:37 AM Great result Dave you are really flying the flag.Daniel Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now