Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 9m 13d Gender: Male Location: Darwin, NT Posted 27/07/09 11:00 AM Share Posted 27/07/09 11:00 AM Hello fellow T Fans,Took my car in for its tune today after putting pump in finally all the mods are in...After putting my turbo back in my car it would build to 5psi and that's all with an 8psi tune, if I held in a higher gear it would build to 8psi..Today after getting tune done it was made to push 12psi, and after reading the chart I was shocked..228.6kw up from 190kw... I didn't realize it was running so low before as I still beating people etc.Anyways if I give it to it goes to 10psi then falls back to 6psi if I hold in high gear it goes to 12psi once again.Mechanic took the wastegate pipe of and it still only goes to 10psi etc, if I leave in manual mode it goes to 10psi then drops to 6psi through the rest of the gears...Now here is mods, Siemens 60lb Injectors, Walbro GSS342 Fuel Pump, Bluepower CAI, HDi Intercooler, Bosch Platinum Spark Plugs and an exhaust...Any help please... Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/ Share on other sites More sharing options...
The_Bogan Donating Members 881 Member For: 18y 14d Gender: Male Location: Brisbane, Queensland Posted 27/07/09 11:46 AM Share Posted 27/07/09 11:46 AM valve springs Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-912820 Share on other sites More sharing options...
ravenhard Donating Members 1,517 Member For: 17y 1m 14d Gender: Male Location: Blacktown! Posted 27/07/09 12:42 PM Share Posted 27/07/09 12:42 PM weak actuator? Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-912890 Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 10m 28d Gender: Male Location: Sydney NSW Posted 27/07/09 01:14 PM Share Posted 27/07/09 01:14 PM cat blockage perhaps...If you pulled the actuator off and theres only 10psi then either the turbo is on its way out, or a major restriction somewhere.From your mods list it should be happy making high boost, so Id look at the cat as its been common for them to have issues Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-912910 Share on other sites More sharing options...
Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 9m 13d Gender: Male Location: Darwin, NT Posted 27/07/09 02:02 PM Author Share Posted 27/07/09 02:02 PM Its a BF MkII and never has had the rev limiter taken of so I doubt the Valves..Actuator sounds more down the line to me, anyway of testing though?Cat, anyway of checking without removing the cat? We removed the hose to the wastegate so by rights it should just go of its tits... Turbo was just put on so hopefully not that... Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-912931 Share on other sites More sharing options...
stevet Member 85 Member For: 17y 6d Posted 27/07/09 11:45 PM Share Posted 27/07/09 11:45 PM Sounds like im in the exact same boat as you plugg3r! I dont have all the mods as you, ive just got a cooler. My guess is weak actuator? or maybe cat? but both theories have their flaws :wacko: Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-913026 Share on other sites More sharing options...
Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 9m 13d Gender: Male Location: Darwin, NT Posted 27/07/09 11:47 PM Author Share Posted 27/07/09 11:47 PM Taking my car to an exhaust shop today to get them to check the cat, I hope its just cat collapsed if so ill get a new one fitted there. Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-913028 Share on other sites More sharing options...
Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 9m 13d Gender: Male Location: Darwin, NT Posted 28/07/09 12:48 AM Author Share Posted 28/07/09 12:48 AM Hey was just wondering is there any tests to check the actuator... Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-913063 Share on other sites More sharing options...
Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 9m 13d Gender: Male Location: Darwin, NT Posted 28/07/09 05:02 AM Author Share Posted 28/07/09 05:02 AM After more research appears to be the actuator not pushing flushly against the flapper, will remove it this weekend and try a few things.. Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-913196 Share on other sites More sharing options...
stevet Member 85 Member For: 17y 6d Posted 04/08/09 05:27 AM Share Posted 04/08/09 05:27 AM hey plugg3r, you get any closer to working out what the problem was? Link to comment https://www.fordxr6turbo.com/forum/topic/60059-big-problems-in-little-china-help/#findComment-916395 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now