Fuel Pump & Injectors

[sambo_xr6t]

hey guys what kinda of fuel pump and injectors will I need for the 300rwkw mark. are like bosch 42lb 440 cc ok, and Walbro Gss341 Fuel Pump.

are they fine or do I need diffrent types thanx heaps .

Edited 22/07/09 03:18 PM by sambo_xr6t

[ENVYOSXR]

if your after the 300rwkw area I would be puting in Siemen Deka injectors and the walbro fuel pump, you will need better intercooler to reach that power level safely though if your running the stocker IC

[sambo_xr6t]

thanx mate yea will be getting new cooler. just gonna supply the parts to my tuner. seem to save a little bit hear and there.

[stockxr]

hey dude I put 42lb bochies, my tuner reconds they will max out at about 300-320, so there good for the power. BUT!!!! once you start u wont stop so if your looking for advice go the seimen 60lb, foe an extra 1-200 its worth it later on...

[sambo_xr6t]

thanx again guys just brought siemens deka 60lbs and gss341 for 580 delived to my door.

[ENVYOSXR]

yea always best to get part that will allow you to go further in the future if you want more power. rather than replacing parts again and again.

also if its a manual your going to need a new clutch, you will find the stock one will slip alot. If auto you might want to look at a tranny cooler and getting it rebuilt to handle the new power.

[Adam]

I've got 300rwkw's on 968's and won't be going further, so they're perfect for my needs. I chose the 968's for superior idle quality and idle mixtures.

[twisty1]

  sambo_xr6t said:

thanx again guys just brought siemens deka 60lbs and gss341 for 580 delived to my door.

Wherewherewherewhere??

[XtRmn8]

Have a search on ebay mate. You can get both Siemens or Bosch injectors with a Walbro pump for 580 to your door.

[sambo_xr6t]

yup that's were I got mine and a xcal 3 as well cheap