Use The Clock As A Gps Mount -navman

[bad inferno]

I trust the pictures tell the story. really functional as its easy to use and looks great.

I was planning to run the power cable down the back of the dash however had trouble and did not want to pull the dash apart.

The power cable actually just squeezed down the LHS of the facia. and connects to the back of the lighter socket.

Used a single hex cap screw to hold it in place. A Dremel enables you to cut out a small section at the top of the clock mount to also hold lock it in palce

Could not believe that the 1/4" thread held against the mount, just by using the existing clock mounting tabs.

I used some Selleys "Knead it" cement to make sure it all stays in place. It is REALLY strong

Edited 17/07/09 10:32 AM by bad inferno

[JETURBO]

not bad champ not bad at all

[Panda Eyes]

good idea. by the way- what time is it?

[bad inferno]

The GPS does show the time, however I also think Ford maybe able to reprogram the icc to show the time on the screen. ANybody seen teh time on the colour display ? Must be used int eh FPV as there is no clock.

[Panda Eyes]

my ghia had the dual climate, but the clock was where yours was. dont the fpv's have a clock on the headlining just behind the rear view mirror?

[TaHa]

Nice. its a good idea, but Id rather have my Boost Gauge there... Also the Fpv's have a digital clock up where the lights are or some cars sun glasses holder. Only some of the Colour screen ones come with the time, I still gotta find out if they can do it..