Jump to content

Recommended Posts

  • Banned
  • Member For: 15y 10m 25d
  • Gender: Male
  • Location: Blacktown NSW

Hey Guys,

After sorting some boost leaks the BA went on to making 313.6kw atw with no sign of valve float from the stock springs! Stock actuator and wastegate prevented it from going any higher.

BA 2005 MKII 4sp Auto

HDI Intercooler with cold side piping

3" High flow cat with removed centre muffler and rear muffler

Bosch 558 injectors and Walbro GSS341 Fuel Pump

K&N Panel filter with APS under headlight CAI

Custom tune by C&V Performance

post-35942-1246861222_thumb.jpg

Link to comment
https://www.fordxr6turbo.com/forum/topic/59281-made-it-with-3136kw-atw/
Share on other sites

  • loitering with intent
  • Lifetime Members
  • Member For: 21y 8m 17d
  • Gender: Male
  • Location: Zombie Birdhouse

was it stock before the tune ? How does it drive now ?

  • Banned
  • Member For: 15y 10m 25d
  • Gender: Male
  • Location: Blacktown NSW

The car had a custom flash (detonating it's head off) prior to this tune by a tuner who is not worth mentioning. Not one of our sponsors.

The graph tells me the car is running about 13psi tappering back to about 12psi, however my guage inside the car says it's more like 14-15psi. It's only a cheap guage so it could be out by a pound or so.

The car now pulls consistantly and smoothly. Breaks traction when the auto kicks down to second. The guys lifted the line pressure to the auto which has made cruising a little bit more aggresive in gear changes. But as I said to the guys at C&V, I prefer a hard changing box than no box.

Firstly I want to install a nice cooloer for the trans. Then the valve springs because I think I have been very lucky to get this far, actuator and port the wastegate.

Apart from the trans cooler the rest can all wait as I am extremely happy with the output I am getting.

P.S I must add that I am extremely happy with the HDI Intercooler, power feels the same run after run! The stock intercooler after 2-3 runs felt like there was about a 15-20kw power drop.

Thanks for your responses guys.

  • Member
  • Member For: 16y 3m 8d
  • Location: adelaide

have you owned it from new? maybe a past owner fitted bigger valve springs?

im going to buy a HDI cooler I think were going to see more and more of these I dont think they can be beaten for the price

  • Banned
  • Member For: 15y 10m 25d
  • Gender: Male
  • Location: Blacktown NSW

I know the previous owner well. He didn't fit valve springs to it just had it flash tuned. Prior to him it was owned by a business, doubt they would fit springs to a stocker for no reason.

You are right on the money about the HDI cooler. Definately the best bang for buck and good for about 400rwkw!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'