Guages For Fgt

[Juan]

hey guys.

wondering if there are any boost/oil pressure dash gauges available for the FGT yet

would look awesome. asked around and they all say they haven't heard of one around just yet.

thanks people

Edited 30/06/09 02:15 PM by Juan

[GMH8R]

  Juan said:

hey guys.

wondering if there are any boost/oil pressure dash gauges available for the FGT yet

would look awesome. asked around and they all say they haven't heard of one around just yet.

thanks people

Hey mate, There isn't a pod or anything yet for the fg's but When I spoke to chris from rapidsystems the other day he said he is looking at making something for his g6et that sits just below the ICC. Going to get back to him in a few weeks to see how it's goin. ATM I think he has them sitting on his steering column temperarily. Hope this helps you as chris has helped me. Other option is the fg f6 dash cluster ?

Edited 05/07/09 01:13 AM by GMH8R

[01txr]

Best to make up a custom pillar gauge set up, gauge would be no use being down out of view.

Or if don't like the look of gauges on the pillar just use warning leds.

There are led set ups to hook up if you go searching.

Was just reading the other day someone releasing a multi shift light setup that

employs think it was 5 leds that work at set rpms going from green to yellow to red.

Other than that have a look at PLX industries, they have plenty of options with

one of there newer additions being a rectangular lcd screen that you can design your

own layout and hook whatever sensors up to it as well as a OBD2 connection so you

can view all perimeters from your ecu.

This could be either mounted on the dash or maybe on the windscreen as per sat nav's,

or if you wanted, make a slot in the cover over your ICC screen that you can slot it into

and remove it for security.

I have there 52mm O2/Lambda gauge setup, able to load your own backgrounds, design your own

gauge styles, as well one gauge/monitor can read up to 8 perimeters, comes with a remote

to scroll throught etc.

I'm very impressed with it.

Check them out, plenty of options and they have won numerous Seema awards

http://plxdevices.com/

[Juan]

how do you install the guages? I dont see where you run the cable to.