jacobmitchell92 Donating Members 370 Member For: 13y 7m 13d Gender: Male Location: Perth Posted 15/10/12 01:24 PM Share Posted 15/10/12 01:24 PM Ok then that's slightly annoying considering they were suppose to be off a FG GT-P ill try and reverse the mounts tonight but the bolts lined up but where the struts are machined out they didn't fit on and the rears were off centre and the calliper pressed up against the disk when it was tightened! Im running out of posts today! I have 4 left and id really like to get this sorted tonight as I fly away to work in the next few days for 2 months! Link to comment Share on other sites More sharing options...
winstor Member 611 Member For: 15y 8m 26d Posted 15/10/12 01:36 PM Share Posted 15/10/12 01:36 PM (edited) Picture of the 4 pot is for the rear left. Ill go take some photos of mine, only put them on last week.Also what do you mean the rears are off center? Edited 15/10/12 01:40 PM by winstor Link to comment Share on other sites More sharing options...
jacobmitchell92 Donating Members 370 Member For: 13y 7m 13d Gender: Male Location: Perth Posted 15/10/12 01:42 PM Share Posted 15/10/12 01:42 PM Righto then, but when they were bolted on they seemed to press up against the inside of the disk.... I always thought the bleed nipples sit at the top? Yes some pictures would be handy. And im down in Rockingham (Perth) if that's not too far away? Link to comment Share on other sites More sharing options...
winstor Member 611 Member For: 15y 8m 26d Posted 15/10/12 01:58 PM Share Posted 15/10/12 01:58 PM Yeh bleed nipples sit up top. Could be the brake pad pushing on the disc if the pistons havent been pushed back in properly?Excuse the dirt lol.Front LeftRear Left Link to comment Share on other sites More sharing options...
jacobmitchell92 Donating Members 370 Member For: 13y 7m 13d Gender: Male Location: Perth Posted 15/10/12 02:04 PM Share Posted 15/10/12 02:04 PM ill go see if the piston has been pushed back fully now but I wont be able to test fit until atlest tomorrow arvo when I get access to a hoist. ill have to try and change the brackets, so I pretty much swap the left to the right?how do you like them??? pull up okay? lolThanks heaps for your help, without this id be screwed!! Link to comment Share on other sites More sharing options...
winstor Member 611 Member For: 15y 8m 26d Posted 15/10/12 02:11 PM Share Posted 15/10/12 02:11 PM (edited) Yeh, should be some info about it in this section.http://www.fordxr6tu...brembos-fit-fg/http://www.fordxr6tu...-brembos-to-bf/http://www.fordforum....php?t=11357871http://www.fordforum....php?t=11372912http://www.fordforum....php?t=11370300http://www.fordforum....php?t=11374046 Edited 15/10/12 07:58 PM by Dagabond Link to comment Share on other sites More sharing options...
jacobmitchell92 Donating Members 370 Member For: 13y 7m 13d Gender: Male Location: Perth Posted 15/10/12 04:21 PM Share Posted 15/10/12 04:21 PM Okay so turns out the ones I brought are off a BA-BF (6 pots) so the brackets are the same, do I just switch the brackets around or do I have to change the cross over pipe as well?It seems to be a long time since anyone posted on this! Apparently I have brought some brembos off a BA-BF thinking they were off a FG GT-P and im trying to put them onto a FG sedan, do I just swap the mounting brackets around? or do I have to change the cross over pipes? I already have the brake hoses.hmmm ill have to give it a shot tomorrow morning! Fingers crossed it works! I suppose the brake hoses will be off a BA-BF too then Link to comment Share on other sites More sharing options...
KeddyXR6T Donating Members 320 Member For: 15y 8m 17d Gender: Male Location: Melbourne Posted 17/08/13 12:58 AM Share Posted 17/08/13 12:58 AM So with 4pot brembo front's from a FG when I fit them to a BA all I need to do is switch the brackets and change the nipple and pipes from top to bottom and because the pistons are the same size they will be fine yes Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now