Jump to content

Recommended Posts

  • 570Nm @1800rpm
  • Donating Members
  • Member For: 21y 8m 19d
  • Gender: Male
  • Location: Perth, WA

If I ever get a kit like this I'd be doing the same. Wish the rubber joiners were black. All this kit needs is the PW crossover and a decent under batter air intake.

Still for $570 it is a bargain :spoton: ............plus I like the idea of having the top grill I/C free so that some fresh air can get to the radiator.

  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

  • Loves boost
  • Donating Members
  • Member For: 16y 9d
  • Gender: Male
  • Location: VIC

do you need to get a tune after fitting these coolers?

I am getting a custom tune but I am putting all the hardware on my self then get a custom tune, I have a flash tuner with a generic tune on it would that fix any temporary issues with overboosting if I don't drive it hard while I get the custom tune organised?

  • Forged Member
  • Lifetime Members
  • Member For: 18y 4m 3d
  • Gender: Male
  • Location: SW Sydney

Some cars overboost with a cooler change, some don't. Its always a good idea to have the car tuned asap after intake and especially major exhaust mods. Fit all your gear and just stay off boost until its tuned, the generic tune may do more harm than good if its only configured for a stock car...

  • Loves boost
  • Donating Members
  • Member For: 16y 9d
  • Gender: Male
  • Location: VIC

no worries I will fit the cooler the day before I get the car booked in at the tuners. Yea I hate generic tunes, they do more harm than good I reckon. Thanks for the help

  • Banned
  • Member For: 15y 11m 30d
  • Gender: Male
  • Location: Blacktown NSW
  XtRmn8 said:
If I ever get a kit like this I'd be doing the same. Wish the rubber joiners were black. All this kit needs is the PW crossover and a decent under batter air intake.

Still for $570 it is a bargain :bowdown: ............plus I like the idea of having the top grill I/C free so that some fresh air can get to the radiator.

Supersh#t sell Black silicone joiners for about $ 11. You only need 5 of them.

Having the top of the grill is a bonus I can now instal my PWR trans cooler there.

Olso if you buy off the same seller on Ozition, as I did, it's $10 cheaper cause his fees are lower than ebay!

Edited by redbackalarms
  • 2 weeks later...
  • Member
  • Member For: 16y 4m 13d
  • Location: adelaide

I just brought ones of these off performancewise and apparently his stock in sydney was damaged by a forklift so mine is comeing from hong kong so can you guys let me know if theres a hybrid stamp on the cooler and are there any other brand markings? the silicone bits have the logos yea? just wanna make sure its a legit one if its going from HK

  • Member
  • Member For: 16y 6m 28d
  • Gender: Male
  • Location: Gold Coast

I bought one of these 6 weeks ago and I was told the exact same thing that it was damaged in sydney by a forklift and it came from hong kong.

mine didnt have any hybrid stamps or anything on it except for the blue joiners had HDI on them..... bit suss?

  • Donating Members
  • Member For: 18y 10m 12d
  • Gender: Male
  • Location: Melbourne

you pay is, what you get . that's why we have forum sponsors . rapid systems , process west , avo. and so on . its there products that work and its not ' sus ' just mu 2 cents worth .

  • Member
  • Member For: 16y 4m 13d
  • Location: adelaide

hmmmm well id like to hear what some of the other guys that brought it from performancewise if theres has the stamp as redbackalarms not doubt made great power with his

BOZZTURBO not everyone can afford a $1000 intercooler HDI have a good name for themselfs I have never hurd bad about a genuine hdi cooler its just alot of places were selling cheap china copies as HDI coolers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'