Calling On Ba Mkii Owners

[IH8TOADS]

I would like to here from BA MKII XR6 Turbo owners with the X calibrator 2 flash tuner. DOES THIS DATA LOG with your vehicle? If so could you please let me know what your processor code is (a 4 digit combo written on the side of the computer under the bonnet - back passenger side of the engine bay). I'm most concerned with the T56 (manuals) but if it's auto let me know anyway!

Thanks in advance

[IH8TOADS]

Well I have tried an x cal 2 on my car and it won't log. Processor code is A3YB so if you're upgrading to an x cal 2 or 3 to log and you have this code then from my experience don't bother!!

[livewiremax]

It works with all proceesor codes. I have never had a problem data logging any car .. When it read the PIDs it should pick up the HAANF strategy code from the computer.. You should not have to manually add anyting..

What version of LiveLink are you using?

Have you installed the correct drivers on your notebook?

Cheers,

[IH8TOADS]

It works with all proceesor codes. I have never had a problem data logging any car .. When it read the PIDs it should pick up the HAANF strategy code from the computer.. You should not have to manually add anyting..

What version of LiveLink are you using?

Have you installed the correct drivers on your notebook?

Cheers,

Thanks mate, I don't think I'm using the latest version. Will check tonight. I might just re-install everything tonight.

I also had a suggestion to ensure rapid packet is disabled in the menu so will try this first :-)

I have a LM-2 innovate wideband & logger and that's not conecting either and is coming up with a low voltage error so will mock something up so I can run it directly off a battery over the weekend and see if that OBDII logger works. Cheers.

[IH8TOADS]

Didn't change anything and last night it worked....strange but I must have been doing something wrong surely! So I stange corrected the the X cal 2 does work with A3YB.