DK777 Member 44 Member For: 15y 7m 29d Gender: Male Location: Northside Brisbane Posted 22/06/09 04:19 AM Share Posted 22/06/09 04:19 AM hey guys, new to the forum..ive got a 2005 bf xr6t uteperformance modifications so far are-v1.0 rapid systems intercooler kitplazmaman underbattery air induction with podcustom tune from RDP on 9 psi making 349rwhp/260rwkw*have recently removed centre muffler, purchased bosch 044*very soon have 60lb injectors, high flow cat, hotside piping*possibly a 4inch dump later down the track thoughWhat power figure should I be expecting with this setup?300rwkw-350rwkw????Do I need a bigger actuator/flapper etc to retain boost pressure? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 24d Gender: Male Location: SW Sydney Posted 22/06/09 04:33 AM Share Posted 22/06/09 04:33 AM You may crack 300 or so, but you'll need the actuator/flapper mod to hold boost properly when you upgrade the dump pipe. Also, your stock exhaust will become a restriction over 300Good luck and keep us posted on the results, don't chase a figure, just get the car tuned so it performs how you want it. Link to comment Share on other sites More sharing options...
DK777 Member 44 Member For: 15y 7m 29d Gender: Male Location: Northside Brisbane Posted 22/06/09 05:01 AM Author Share Posted 22/06/09 05:01 AM cheers mate, looks like u making some great power? what modifications have you done and what psi are you running at? with the actuator/flapper mod what is involved in it and what $ range should I expect? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 24d Gender: Male Location: SW Sydney Posted 22/06/09 05:47 AM Share Posted 22/06/09 05:47 AM Thanks bud, don't make me list the mods though - I'll remember how much money I spent before I was getting advice and learning from the forum! I'm running a peak of 19psi at the moment, pretty nuts!The flapper and actuator should be around say $450, but that wouldn't include pulling the turbo off and re-fitting, your best bet would be to have a chat to your preffered tuner (hopefully a site sponsor) and they should beable to work out a full package.Try and do as much as possible in one hit, otherwise you may be paying more in the long run. Don't worry about the final figure either, if it drives the way you want, be happy! Link to comment Share on other sites More sharing options...
Sprjenkins Member 52 Member For: 16y 4m 10d Gender: Male Location: Melbourne Posted 29/06/09 12:30 PM Share Posted 29/06/09 12:30 PM Youv'e got some nice power so far 300rwkw should be easily achievable. Your luck you got the BF and not the BA, get better valve springs in the BF Link to comment Share on other sites More sharing options...
DK777 Member 44 Member For: 15y 7m 29d Gender: Male Location: Northside Brisbane Posted 30/06/09 10:43 AM Author Share Posted 30/06/09 10:43 AM cheers mate... yea was happy with that tune.. with only the intercooler,piping and ubi. What power are u making atm? Link to comment Share on other sites More sharing options...
Brandonn Donating Members 2,304 Member For: 16y 2m 16d Gender: Male Location: port hedland Posted 13/07/09 06:25 PM Share Posted 13/07/09 06:25 PM I rekon ull get 311.45have we got a result?? Link to comment Share on other sites More sharing options...
DK777 Member 44 Member For: 15y 7m 29d Gender: Male Location: Northside Brisbane Posted 14/07/09 09:52 AM Author Share Posted 14/07/09 09:52 AM I rekon ull get 311.45have we got a result??SLO BA? lol wont be geting a tune until my tax return... thou will def post up when I do Link to comment Share on other sites More sharing options...
Brandonn Donating Members 2,304 Member For: 16y 2m 16d Gender: Male Location: port hedland Posted 14/07/09 10:20 AM Share Posted 14/07/09 10:20 AM had slocar on itkk kee us posted Link to comment Share on other sites More sharing options...
DK777 Member 44 Member For: 15y 7m 29d Gender: Male Location: Northside Brisbane Posted 17/12/09 09:53 AM Author Share Posted 17/12/09 09:53 AM hehe I got 461rwhp/343rwkw on only 13psi Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now