HIRO F6 Member 1,817 Member For: 16y Gender: Male Location: Brisbane, QLD Posted 15/06/09 03:08 AM Share Posted 15/06/09 03:08 AM I have finally got my FG F6 Ute back from Bayside Performance Service's at Cleveland, and we hit the magic 400+ mark!!!CURRENT MODS:Process West Stage 2 CoolerProcess West CAIProcess West Surge Tank (044 fuel pump)60lb Siemens Injectors.70 front housing38mm flapper valve and ported rear housingAtomic Race Valve Springs12lb actuatorWe were hitting a fraction under 400rwkw so we threw a little bit more boost at it to crack the magic number. I would really like to thank James and the boys at BPS who were just as excited as I was to see it hit over 400rwkw. Once again, I can not recommend BPS any higher as every time my car is in their possession they go over and above my high expectations. I would also like to thank Kevin from Process West for the developement and hard work he has put in to lead the market on research and developement of the FG's. Cant wait to get my hands on that Stage 3 cooler Kev.Thank you also to Mr Turbo at Gaven, but they will be getting a bit more praise after the next round of goodies goes on the car.FUTURE MODS:Process West Stage 3 CoolerMahle PistonsHoward RodsMr Turbo Billet 76-GTS (4inch inlet and 3inch outlet)Split pulse high mount manifoldOther then the above, we will also be strengthining the rear end alot, hopefully before something goes pop!!! We are expecting the next round of goodies to be thrown on the car around September. Link to comment Share on other sites More sharing options...
typhoon_freak Cryptic Clothing Company Donating Members 4,556 Member For: 16y 6m 10d Gender: Male Location: Brisvages, Capalaba Posted 15/06/09 05:32 AM Share Posted 15/06/09 05:32 AM nice work karl.. sux u hit 400 b4 I did. d/w the chase is still on! Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 8m Gender: Male Location: Sydney NSW Posted 15/06/09 06:25 AM Share Posted 15/06/09 06:25 AM Good result mate, what psi did they have to push? Link to comment Share on other sites More sharing options...
dalts Member 755 Member For: 18y 7m 25d Gender: Male Location: brisbane Posted 15/06/09 06:27 AM Share Posted 15/06/09 06:27 AM good numbers karl,well done to you and bpslee Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 16y Gender: Male Location: Brisbane, QLD Posted 15/06/09 06:29 AM Author Share Posted 15/06/09 06:29 AM Thanks Lee.We pushed it up to 20psi. I think she loved it........ Link to comment Share on other sites More sharing options...
Rancidpunx Brisbanes Resident Detailer Donating Members 950 Member For: 16y Gender: Male Location: In my Cabin Outside Brisbane. Posted 15/06/09 06:43 AM Share Posted 15/06/09 06:43 AM good stuff mate, had some fun with it yet? Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 1m 21d Gender: Male Location: Melbourne Posted 15/06/09 07:18 AM Share Posted 15/06/09 07:18 AM Niiiiiiiiice graph. That would be fun to hose people off at the line in.'Oh that's a new F6 ute...' BRWAAAAAAAAAA SOOOHTUTUTUTUTUU Link to comment Share on other sites More sharing options...
menice Donating Members 99 Member For: 15y 11m 6d Gender: Male Location: logan Posted 15/06/09 07:20 AM Share Posted 15/06/09 07:20 AM nice power,would be fun to drive Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 16y Gender: Male Location: Brisbane, QLD Posted 15/06/09 07:23 AM Author Share Posted 15/06/09 07:23 AM good stuff mate, had some fun with it yet?Not really. Just picked it up and drove to work behaving myself alot more then ever before. However, tomorrow I got my FPV drive day at QR, so im sure there will be some stock FPV's to scare the pants off. Bring on the GT's!!! Link to comment Share on other sites More sharing options...
schmick325 Member 67 Member For: 15y 8m 17d Posted 15/06/09 08:05 AM Share Posted 15/06/09 08:05 AM I've been waiting for this thread So are all the issues with the Auto sorted??What was the cause of it?What rpm does the thing start to haul? Is it any laggier than stock?Awesome numbers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now