Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 1d Gender: Male Location: Perth Posted 14/06/09 03:41 PM Share Posted 14/06/09 03:41 PM what issues do the FGs have when you remove the seat?will it cause error codes etc?will these error codes affect warranty? etc Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 10m 18d Gender: Male Location: SW Sydney Posted 14/06/09 11:33 PM Share Posted 14/06/09 11:33 PM You'll get teh airbag light since they come with side airbags in the seat, aside from that I don't think there would be anything else... Oh maybe the beltminder thing cos there is a sensor in the seat for that.Dropping some buckets in Tocchi? Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 1d Gender: Male Location: Perth Posted 15/06/09 01:47 AM Author Share Posted 15/06/09 01:47 AM yeh, got a brand spanking new Bride Low Max sitting about itching to be used somewhere.so its going in for track days. and stock seats put back in for daily drivingif it throughs up an error code, I think ford would just wipe the codes, seeing as the car hasnt been flashed or anything. Link to comment Share on other sites More sharing options...
tinyplums Member 1,080 Member For: 16y 4m 21d Gender: Male Posted 15/06/09 03:24 AM Share Posted 15/06/09 03:24 AM if you get rails made up, let me know would ya, keen for doing similar. Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 1d Gender: Male Location: Perth Posted 15/06/09 05:02 AM Author Share Posted 15/06/09 05:02 AM no probs ross, ill be sourcing BA-FG rails (assume they are the same), and ill use angle bar for the parts it bolts to the seat Link to comment Share on other sites More sharing options...
Rancidpunx Brisbanes Resident Detailer Donating Members 950 Member For: 15y 11m 5d Gender: Male Location: In my Cabin Outside Brisbane. Posted 15/06/09 06:39 AM Share Posted 15/06/09 06:39 AM I got an airbag error warning and the "transmission not in park" (even though I have a manual) when I did my stereo. Removed the seats with the battery unplugged. Got the warning when I started her back up the first time. Turned it all the way off and then back on and it was all good. Not sure how you will go when driving with all the plugs not hooked up. Will be a sh*t if it chimes at you constantly for not wearing your seat belt. Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 1d Gender: Male Location: Perth Posted 17/09/09 04:19 PM Author Share Posted 17/09/09 04:19 PM ok little update.remove the seats, first time you turn the car on, you get the "transmission not in park" message.turned car off... it went awaybut everytime I turn the car on, I get the "airbag error" msg flash on digital dash, but it goes away.just leaves 2 little error icons... no biggy.. ford can remove them at services. Link to comment Share on other sites More sharing options...
dougsta Member 9 Member For: 16y 5m 19d Gender: Male Posted 12/12/09 05:32 AM Share Posted 12/12/09 05:32 AM Where did you get the "tool" to unbolt the seats? It has a star like bolt. I am removing my seats to add leather retrims but need the "tool" so I can take the seats out....Please forgive my noobieness Link to comment Share on other sites More sharing options...
PHANTMXR6 It's not a MKI! Member 1,742 Member For: 16y 6m 6d Gender: Male Location: Earth Posted 12/12/09 05:37 AM Share Posted 12/12/09 05:37 AM The 'star' tool you refer to are known as Torx bits.I can't remember the exact size you need for the seat mounts, but you should be able to buy a kit from any reputable hardware store. Link to comment Share on other sites More sharing options...
dougsta Member 9 Member For: 16y 5m 19d Gender: Male Posted 12/12/09 05:39 AM Share Posted 12/12/09 05:39 AM The 'star' tool you refer to are known as Torx bits.I can't remember the exact size you need for the seat mounts, but you should be able to buy a kit from any reputable hardware store.Excellent thanks PHANTMXR6 I had hoped that was the case. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now