Rancidpunx Brisbanes Resident Detailer Donating Members 950 Member For: 15y 10m 3d Gender: Male Location: In my Cabin Outside Brisbane. Posted 13/06/09 12:03 AM Share Posted 13/06/09 12:03 AM I dont think that is the point. If I buy a table with one short leg, a book under it is a solution but not a fix for the problem. If there is a design flaw then a recall should be announced. I dont want to be out with a tub full and give it some to get up a hill or pass someone and then have the back end sh*t itself. Link to comment Share on other sites More sharing options...
Venom XR6 Member 1,460 Member For: 21y 6m 28d Location: Geelong Victoria Posted 14/06/09 05:08 AM Share Posted 14/06/09 05:08 AM (edited) I dont think that is the point. If I buy a table with one short leg, a book under it is a solution but not a fix for the problem. If there is a design flaw then a recall should be announced. I dont want to be out with a tub full and give it some to get up a hill or pass someone and then have the back end sh*t itself.What I was referring to applies to lowered utes only. Ford do not care what happens after you have modified the suspension. Herrods fix applies to utes that have been lowered only. They recognised a problem and know how to get around it.SCATRD - I've forgotten what the problem is, you'd have to ask them. Edited 14/06/09 05:08 AM by Venom XR6 Link to comment Share on other sites More sharing options...
alexr8 Member 42 Member For: 16y 1m 18d Gender: Male Posted 14/06/09 08:00 AM Author Share Posted 14/06/09 08:00 AM My ute had no load in the back what so ever but was seeing 295rwk's when it happened. Getting it raised on monday and hopefully it wont happen again Link to comment Share on other sites More sharing options...
xaray Member 44 Member For: 16y 3m 17d Gender: Male Location: Adelaide Posted 14/06/09 08:50 AM Share Posted 14/06/09 08:50 AM how low can you go before its a problem? I'm thing of going 40 mm at rear! also has anyone tried lowering blocks and are thay easily reversred when car needs to go in for service? Link to comment Share on other sites More sharing options...
alexr8 Member 42 Member For: 16y 1m 18d Gender: Male Posted 14/06/09 09:29 AM Author Share Posted 14/06/09 09:29 AM Not sure how low but mine was slammed hard. Looked great and the ride was quite good considering how low it was but breaking CV's is an expensive process! Im getting mine raised another 30mm in the rear and I have kings super super lows in the front and once its raised taht should bring the rear a touch lower than the front Link to comment Share on other sites More sharing options...
omie_747 Member 46 Member For: 21y 10m 22d Gender: Male Posted 14/06/09 09:44 AM Share Posted 14/06/09 09:44 AM whats does herrods fix involve?? interested as I was thinking about putting their kit on my ute also?cheers Link to comment Share on other sites More sharing options...
utemad Member 120 Member For: 16y 5m 26d Posted 17/06/09 08:24 AM Share Posted 17/06/09 08:24 AM Mine runs round dragging its bum all day .. would love to know what the banging noise is though as its not hitting the ground but banging on something .. especially if there are 2 bumps in a row to start a momentum happening has 10k now with no trouble yetutemad Link to comment Share on other sites More sharing options...
TUFGSR Member 514 Member For: 19y 9m 12d Posted 17/06/09 08:49 AM Share Posted 17/06/09 08:49 AM Mine does this too but I just put it down to the fact I have 15mm clearance on the bump stops....with an empty tub. Link to comment Share on other sites More sharing options...
tinyplums Member 1,080 Member For: 16y 3m 19d Gender: Male Posted 17/06/09 08:53 AM Share Posted 17/06/09 08:53 AM haha I had 5, hindsight was a bit dumb, got airbags but just didnt get round to fitting them. Link to comment Share on other sites More sharing options...
utemad Member 120 Member For: 16y 5m 26d Posted 19/06/09 10:22 AM Share Posted 19/06/09 10:22 AM Mine does this too but I just put it down to the fact I have 15mm clearance on the bump stops....with an empty tub.Don't have bump stops any more.. bags took there place .. there wasn't much gap stock like you saidutemad Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now