Zf Tuning...

[Street Tuner]

  On 24/05/2011 at 7:21 AM, pazzo xr6t said:

what I would like to know is, I still have the xcal 1 and will be looking at getting a retune soon. so will upgrade to the xcal 3, but is the xcal 3 be around for a while or are sct going to bring out a xcal 4 in the near future? or am I safe with the xcal 3 for a while. cheers.

Neither XCal1 or XCal2 have the available memory for the ZF firmware, so to tune these transmissions you need an XCal3. All of the information I am getting on the XCal3 is that there is no requirement to change any time soon. It would seem to be supported in Australia indefinitely

[Street Tuner]

  On 24/05/2011 at 7:25 AM, INASNT said:

Can the torque reduction be left on for down shifting and off for up shifting? Current its on or off for both.

Torque reduction can be applied independently in a dedicated table for every possible shift event. The short answer is 'yes'

Currently - or with your existing tune - there is still reduction happening inside the ZF from delays in shift event timing through to allowed clutch slip. Its pretty involved

Edited 24/05/11 08:45 AM by Street Tuner

[KeepLeft]

I know this is a pain in the arse question, but do you have a rough timeframe? Are we talking weeks, months or years?

[Headsex]

Will the TCM flash be separate to the PCM as in a separate flash option, or will it flash both pcms together..

I ask this in terms of wasted flash time.. No need to flash TCM if you haven't made any changes (and wasting more time during the flash process).

Which Vehicles are currently supported?

[Street Tuner]

Firmware release is not finalised HeadSex. At the moment we can switch between flashing just the PCM or the PCM and the TCM

[Headsex]

Ahh.. Turbo Territory supported?

[Street Tuner]

Cant see why not, we are busy collecting and uploading files into the database now. Many are added, many to go

[bradles024]

  On 24/05/2011 at 8:01 AM, Street Tuner said:

All of the information I am getting on the XCal3 is that there is no requirement to change any time soon. It would seem to be supported in Australia indefinitely

[discostig]

How smooth are the shifts able to be made while retaining performance?

Or perhaps more practically: Can the shifts be made smooth but fast in manual mode/Perf mode but remain silky smooth in lazy D mode?

I'm wanting the refined feel back, it's a bit jolty at times with just the pressures messed with.

[INASNT]

How much different are the ZF in the FG to the one ZF's that come in the new Jag's whith the paddle shifts on the steering wheel and the auto throttle blib on downshifts?

Can the throttle blip be added to the downshifts as stever mentioned just in performance mode?