sct Member 30 Member For: 14y 6m 1d Posted 28/05/11 09:41 AM Share Posted 28/05/11 09:41 AM (edited) Firmware upgrades for current owners of x3 to suit the ZF programming will be avaliable from your tuner at no cost , for the tuner to be able to calibrate your ZF trans a new firware must be installed.herrod are still testing and once they are happy with the firmware a release date will be announced Edited 29/05/11 11:11 AM by hiddeous Quote Removed, USE ADD REPLY OR FAST REPLY!! Link to comment Share on other sites More sharing options...
Street Tuner Member 727 Member For: 21y 11m 25d Posted 28/05/11 09:48 PM Share Posted 28/05/11 09:48 PM xcal2 won't be able to tune the zf, only xcal3 can. so everyone who has a xcal2 has to upgrade to a xcal3. pretty sure there's a few with the xcal2 on here. so you have to buy the xcal3 $695-$795, then pay for a retune around $1000. gonna be alot of unhappy people. street tuner posted it up on page 4 post 71.X2 simply doesnt have the memory to support the additional size of the transmission module.X2 was designed in an era where there were no off-board transmission controllers in these cars hence being able to load the ZF file was never part of the design brief. X3 was prepared for this eventuality.The good news is that you dont - have - to tune your ZF. So you dont - have - to upgrade the X2 if you have one.ZF Tuning is an option for those that want it rather than a mandatory part of the tuning process. Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 4m Gender: Male Location: Zombie Birdhouse Posted 28/05/11 11:15 PM Share Posted 28/05/11 11:15 PM where is Peter Link to comment Share on other sites More sharing options...
Trough Lolly Member 4,349 Member For: 20y 3m 11d Gender: Male Location: Mildura Posted 29/05/11 10:36 AM Share Posted 29/05/11 10:36 AM haha SCT are still thrusting deep with no lube it seems... No more for this little black duck! F U SCT. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 25d Gender: Male Location: Probably above atmospheric pressure Posted 29/05/11 11:55 PM Share Posted 29/05/11 11:55 PM If anyone wants any specific technical information on what will be available to the tuners/customers in the ZF calibration software, then ask away. I have been involved in the development process and am happy to answer your questions Where'd you go? We asked a few Q's just after you posted this. Love us and leave us? :'( Link to comment Share on other sites More sharing options...
Tucool Member 22 Member For: 16y 1m 14d Posted 30/05/11 05:22 AM Author Share Posted 30/05/11 05:22 AM I look forward to this option finally being released and well done to all involved, I'm sure there has been some deep despair during the last couple of years of developement.Just as a matter of interest do you think you will be able purchase a Xcal 3 with a couple generic tunes for the ZF or will it be a custom tune for the individual needs?Anyway I'll be one of the first to upgrade from the Xcal 2 to Xcal 3 to tune my ZF and finally get some real performance. Link to comment Share on other sites More sharing options...
Street Tuner Member 727 Member For: 21y 11m 25d Posted 30/05/11 07:22 AM Share Posted 30/05/11 07:22 AM (edited) Where'd you go? We asked a few Q's just after you posted this. Love us and leave us? :'(Sorry Steve I missed your questions!Amongst all the background noise its easy to do....now let me go looking for them....Ok I found it. My advice would be to have the transmission internal settings (mechanical) set back to factory, and then use the tuning software to adjust the pressures up where need be. It probably could be done backwards as you request, but I have never tried it so cant give you a definite answer. Edited 30/05/11 07:24 AM by Street Tuner Link to comment Share on other sites More sharing options...
KeepLeft Member 240 Member For: 15y 5m 18d Gender: Male Posted 30/05/11 07:22 AM Share Posted 30/05/11 07:22 AM Good question regarding generic tunes. I'd like to hear an answer about that too Link to comment Share on other sites More sharing options...
Street Tuner Member 727 Member For: 21y 11m 25d Posted 30/05/11 07:26 AM Share Posted 30/05/11 07:26 AM Just as a matter of interest do you think you will be able purchase a Xcal 3 with a couple generic tunes for the ZF or will it be a custom tune for the individual needs?Anyway I'll be one of the first to upgrade from the Xcal 2 to Xcal 3 to tune my ZF and finally get some real performance.Each and every ZF tune will be custom, where the file has to be uploaded out of the individual vehicle for modification by a tuner. At this stage we have indentified over a dozen different base programs in the same series of vehicle.....so no generic....at this stage Link to comment Share on other sites More sharing options...
INASNT Member 361 Member For: 18y 3m 28d Gender: Male Location: Melbourne Posted 30/05/11 07:43 AM Share Posted 30/05/11 07:43 AM Each and every ZF tune will be custom, where the file has to be uploaded out of the individual vehicle for modification by a tuner. At this stage we have indentified over a dozen different base programs in the same series of vehicle.....so no generic....at this stage How different have they been?Does Ford do any mods to the ZF when they get delivered from Germany or do they just install them and treat it as a 'black box'? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now