ColinFGXR6T Member 63 Member For: 14y 5m 23d Gender: Male Location: Perth Posted 03/01/11 11:55 AM Share Posted 03/01/11 11:55 AM Thanks Mate. I'll have to have a look. Link to comment Share on other sites More sharing options...
Guest markytheman Guests Posted 03/01/11 12:11 PM Share Posted 03/01/11 12:11 PM I now lea at Real Dyno performance in Brisbane has a fg xr6t that's run a time of 10.99 at 126mph with 508hp. it was the first fg to brake in to the 10s. Link to comment Share on other sites More sharing options...
ColinFGXR6T Member 63 Member For: 14y 5m 23d Gender: Male Location: Perth Posted 04/01/11 08:56 AM Share Posted 04/01/11 08:56 AM Got the mag. Don't like the wheels but the car as a whole is pretty sweet. I'm suprised he has standard modded turbo and a standard internals.Looks like the only thing he has upgraded in the motor is valve springs. that's the bonnet I'llbe getting. Link to comment Share on other sites More sharing options...
RIP_HSV HOON Member 1,636 Member For: 14y 7m 26d Gender: Male Location: W.A Posted 04/01/11 09:45 AM Share Posted 04/01/11 09:45 AM MT tuned (Ross's) FG F6 has made 470 rwkw's on stock bottom end first FG into the tens in W.A unbelievable power through a stock motor!! Link to comment Share on other sites More sharing options...
Guest markytheman Guests Posted 04/01/11 09:55 AM Share Posted 04/01/11 09:55 AM : Got the mag. Don't like the wheels but the car as a whole is pretty sweet. I'm suprised he has standard modded turbo and a standard internals.Looks like the only thing he has upgraded in the motor is valve springs. that's the bonnet I'llbe getting.its good power mate. he modded the turbo with a f6 one I think.?? if I was u 2 be safe. I would just go 500hp mate. I now that is safe with RDPs fg xr6t having 508hp for 2 years and doing 10s with standard internals. good luck mate.. Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 3m 19d Gender: Male Location: Perth, W.A. Posted 04/01/11 11:44 AM Author Share Posted 04/01/11 11:44 AM I had 405 with standard and 15 pounds. Probably 450ish with more boost, but I'm not one to risk... Link to comment Share on other sites More sharing options...
ColinFGXR6T Member 63 Member For: 14y 5m 23d Gender: Male Location: Perth Posted 04/01/11 12:11 PM Share Posted 04/01/11 12:11 PM Thanks Marky. Did RDP have any internal work done like valve springs etc? What about your Kice? Did you just sort out the fuel pump/surge etc? How safe did XTF say your engine would be with 405kw? Didyou end up damaging your motor with that power? Also what turbs where you running to get that power?Sorry for all the questions. Link to comment Share on other sites More sharing options...
Guest markytheman Guests Posted 04/01/11 09:59 PM Share Posted 04/01/11 09:59 PM mate. RDPs car had stock internals mate. made 508hp.. mods r HDI cooler f6 turbo 3.5 exhaust and up grade driveshafts. if u get issue 75 street fords. RDPs car is in it mate. 3 pages of the car. Link to comment Share on other sites More sharing options...
ColinFGXR6T Member 63 Member For: 14y 5m 23d Gender: Male Location: Perth Posted 05/01/11 02:15 AM Share Posted 05/01/11 02:15 AM Thanks bud. I'm still waiting for issue 75 in the mail. Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 3m 19d Gender: Male Location: Perth, W.A. Posted 05/01/11 02:32 AM Author Share Posted 05/01/11 02:32 AM Motor was fine. As I did the turbo upgrade I bought a built motor for safety. Turbo for 405 was a fg f6 one. Markey I don't beleive the turbo rdp used was not a f6 spec one, they use a compressor wheel from the gt30 turbo for quicker spool up. Down side of that was they had to jam heaps of boost to make the desired power I.e 23+. much more sensible to go with f6 spec, max power and slightly laggier by a few hundred rpm. Don't know where you got 20psi from, regardless I got more power with less boost which overall IMO will be safer option. But then again if your looking at goin to my level no point upgrading to a f6 spec coz it's 2k wasted $$$ which is same price of a gt40. Better options for turbo have been released since I've done my testing, don't know how they will work out but surely they are the best option. Forced peformance hagt3782r or Garrett gtx3582r would have best power output with faster spool than even imaginable, better than anything done before Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now