MYBAXRT Member 158 Member For: 15y 8m 27d Gender: Male Location: nowra Posted 30/04/09 10:33 PM Share Posted 30/04/09 10:33 PM hi allwhat are the best spark plugs to get for my ba xr6t and if anyone knows how much coin thay will beand if anyone has got step by step info on how to change them over iam guessing there under the black plastic part on top of the rocket cover is this where thay arethanks heapsrobert Link to comment Share on other sites More sharing options...
MYBAXRT Member 158 Member For: 15y 8m 27d Gender: Male Location: nowra Posted 30/04/09 11:25 PM Author Share Posted 30/04/09 11:25 PM I found it dont worry Link to comment Share on other sites More sharing options...
PHANTMXR6 It's not a MKI! Member 1,742 Member For: 16y 5m 13d Gender: Male Location: Earth Posted 01/05/09 01:44 AM Share Posted 01/05/09 01:44 AM Rocket cover. Link to comment Share on other sites More sharing options...
NYT-SKY Member 155 Member For: 15y 11m 4d Gender: Male Location: SW Sydney Posted 01/05/09 02:01 AM Share Posted 01/05/09 02:01 AM The copper NGK plugs are all you will need.Just replace them with every service and you wont have any dramas.Around $25 mark from memory. Link to comment Share on other sites More sharing options...
bjcrown Donating Members 182 Member For: 19y 1m 13d Posted 02/05/09 06:15 AM Share Posted 02/05/09 06:15 AM If you're car has been tuned... consensus here is to ensure the spark gap is set at about .8mm. and to save some money, purchase Ford Genuine spark plugs for a BF Typhoon as they are gapped at .9mm from factory. Just ensure they are then gapped to .8mm before putting them into your car....Replace at around 40,000- 50,000 and you can't go wrong! Link to comment Share on other sites More sharing options...
jacob_xr6turbo Donating Members 433 Member For: 17y 2m 21d Location: Richmond, Melbourne Posted 02/05/09 07:18 AM Share Posted 02/05/09 07:18 AM Man, I wish my car was fast enough to have a rocket cover You will need NGK 0.8mm gapped plugs. The part number is: BKR6EIXThey are pricey, but see if you can get them at trade. Retail is like $23-25 a plug, whereas trade is $13-16.They can be left in the engine for a while without any hassles, as long as the engine is tuned right. I would change them every 25,000-35,000km's to be safe and keep the engine running well. Link to comment Share on other sites More sharing options...
MYBAXRT Member 158 Member For: 15y 8m 27d Gender: Male Location: nowra Posted 02/05/09 08:20 AM Author Share Posted 02/05/09 08:20 AM thanks heaps guys Link to comment Share on other sites More sharing options...
Trough Lolly Member 4,349 Member For: 20y 2m 24d Gender: Male Location: Mildura Posted 02/05/09 05:20 PM Share Posted 02/05/09 05:20 PM The copper NGK plugs are all you will need.Just replace them with every service and you wont have any dramas.Around $25 mark from memory.Winner!most informative post of 2009. Link to comment Share on other sites More sharing options...
exr6turbs Member 10 Member For: 15y 10m 27d Posted 11/05/09 04:49 AM Share Posted 11/05/09 04:49 AM would just go the bcpr6es .8 iridiums are that overated its not funny... when we tried to tune my 180 it would only push 16 psi before it started misfiring really bad. so we chucked a set of the above in and it loved 22psi just had to change them every couple of months but for 12 bucks instead of 80 who cares Link to comment Share on other sites More sharing options...
Trough Lolly Member 4,349 Member For: 20y 2m 24d Gender: Male Location: Mildura Posted 11/05/09 11:50 AM Share Posted 11/05/09 11:50 AM BKR6EIX .8mm pre-gapped. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now