18 X 9.5" +20 (skyline Gtr Offsets), Will They Fit Ba?

[57ING]

Hey guys

Chasing a set of nice Jap wheels for my BA XR6T, will GTR style offsets fit on the Falcon's?

The look Im after is the rear rim lip is sitting on or near the rear guard, similar to what I did with my S15, so need an aggressive offset.

[Tocchi]

you will be pushing it close with 9.5" on the front.

+20 means it will be 16mm further out into the guards than normal B series rims.

id be careful... maybe test fit them before buying

and GTR offset is actually +30, but the aftermarket rims go between +12 to +20 when they are wider

Edited 24/04/09 03:12 AM by Tocchi

[Benny]

57ING,

+20 is definately going to give you a big protruding offset like what you are after. I would think they'd fit but would be putting some strain on your hubs and bearings I guess.

Benny

[Jman]

Let us know how you go.

I'm wanting to change my rears to a +30 or +20

Really struggling with inner clearance on a +42 offset

[Erko]

all round or as part of a staggered set?

9.5 +20 will clear inside front ok, will need to do some some guard work though, and you might need to run less than a 275, though Jap style would normally call for a 245 or so I guess.

will look tough in this size all round, do it.

[YellowTurbo]

I'm running 30+ Works rims and I have no problems with clearance, mind you I have some camber on it. And

it's a FG. I love the wide offset they sits 11mm out on the normal FG rims.

[Tocchi]

18x9 with a 235 on it

offset +30

[Erko]

R34 GTR wheels, nice.

[qikshift]

HORN, those 34 wheels would like so nice in a satin black finish :D

[nelsonian101]

Would these 9" R34 rims be fine with the 245/40 tyres and are they the same front and rear?