damof6 Banned 4 Member For: 15y 4m 30d Posted 01/07/09 08:31 AM Share Posted 01/07/09 08:31 AM Plenums allow similar power to be produced with a performance package on less boost, as seen on numerous turbo powered cars over the years. Most aftermarket plenums available for the Barra engine will flow the same as the lower half of the plenum will be the restriction. Don't forget, all these plenums use the same/similar design base plates so no matter how much air is pumped in one end it can only come out so much at the other end.Some will vary in terms of throttle response & down low torque due to volume, but top end power wont differ SFA.All those out there saying plenums are a waste of time & wont make a difference obviously have never run one & are too tight fisted to get one.I say leave the flow testing alone as it wont be of much benifit. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 26d Gender: Male Location: Adelaide Posted 01/07/09 09:05 AM Share Posted 01/07/09 09:05 AM I have a car Link to comment Share on other sites More sharing options...
Trough Lolly Member 4,349 Member For: 20y 2m 18d Gender: Male Location: Mildura Posted 01/07/09 09:23 AM Share Posted 01/07/09 09:23 AM unfortunately your only claim to fame. Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 3m 7d Gender: Male Location: Zombie Birdhouse Posted 01/07/09 09:26 AM Share Posted 01/07/09 09:26 AM coming up with a few quality posts of late Troughy Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 26d Gender: Male Location: Adelaide Posted 01/07/09 09:41 AM Share Posted 01/07/09 09:41 AM unfortunately your only claim to fame.could be worse I could of used the king of ping and thought it was sweet Link to comment Share on other sites More sharing options...
GR8XR6 ANGEL EYES Silver Donating Members 1,683 Member For: 16y 4m 4d Gender: Male Location: SE Suburbs, Melbourne Posted 01/07/09 10:38 AM Share Posted 01/07/09 10:38 AM I reckon this HERE has got to be the cheapest aftermarket plenum!What are your thoughts? Interesting! Not sure that it would be anygood or whether I would do it. Obviously the design would have to change slightly, interesting idea though. Link to comment Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 7m 1d Gender: Male Location: Brisbane Posted 01/07/09 10:45 AM Share Posted 01/07/09 10:45 AM Would be a bit of an issue if there's a bit of stray fuel sitting in it though wouldn't it? Link to comment Share on other sites More sharing options...
Trough Lolly Member 4,349 Member For: 20y 2m 18d Gender: Male Location: Mildura Posted 01/07/09 01:09 PM Share Posted 01/07/09 01:09 PM could be worse I could of used the king of ping and thought it was sweet Were you there @ the wog tuning day, Or still at daycare waiting for mumsy?? Link to comment Share on other sites More sharing options...
GR8XR6 ANGEL EYES Silver Donating Members 1,683 Member For: 16y 4m 4d Gender: Male Location: SE Suburbs, Melbourne Posted 01/07/09 11:24 PM Share Posted 01/07/09 11:24 PM Ok so there maybe better designs out there but no one is wanting to spend the R & D to make a better one! I am curious about other designs. Anyone know who made the drif6 plenum looks very interesting! :holiday: Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 19d Gender: Male Location: SW Sydney Posted 02/07/09 12:41 AM Share Posted 02/07/09 12:41 AM The boys in melbourne made it mate, that was mostly in house, apart from some help in tuning the thing Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now