FG-XR6T Member 177 Member For: 16y 7m 14d Gender: Male Location: Melbourne Posted 17/04/09 06:08 AM Share Posted 17/04/09 06:08 AM Hey guys,Went to a exhaust shop today asking about dump pipes and high flow cats. They told me if I get a 4 inch dump into a 3.5 inch cat I will need to get it retuned as the car may not be happy but he said a 3.5 inch dump into a 3.5 inch cat will not need to be retuned and the cars should run well.My questions is I am only after a max power output of 320rwkw eventually but at the moment I do not want to get my car tuned. So if I was to get the 3.5 inch dump pipe and cat, would that size be able to support that power (320rwkw) when I eventually get it tuned or is the 4 inch the way to go. should I save up until I can get a tune at the same time or will the 3.5 inch dump and cat be sufficient?Thanks guys really appreciate it.Ben Link to comment Share on other sites More sharing options...
EdB Member 46 Member For: 16y 2m 4d Posted 17/04/09 11:02 AM Share Posted 17/04/09 11:02 AM Mate you wont be able to do much to the zorst without a tune, probably even nothing.Most people are going to say that you can modify the intake pretty safely, ie anything pre-throttle body, but exhaust is a different story. the turbo wont know what to do with itself.probably save for a tune mateEd Link to comment Share on other sites More sharing options...
PSI40T Member 448 Member For: 17y 8m 29d Posted 17/04/09 11:42 AM Share Posted 17/04/09 11:42 AM im getting a high flow cat for mine and getting a tune straight after it to be on the safe side as the car will be overboosting Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 3m 26d Gender: Male Location: Perth, W.A. Posted 17/04/09 11:57 AM Share Posted 17/04/09 11:57 AM (edited) I had 4 " Dump with 4.5" Cat.... 4" Cat back initially... Had to get it retuned plus injectors as they were out...You probably need to add injectors into the mix..I now run 4" dump, 4.5" Cat... 4" over diff split to 2x3inch with 3.5" angled tips.I must say the second setup is a lot better! But very costly I am also selling my X-Force 4" Over the diff - Muffer + 4" tip if anyone's keen? (500km old) You would then only need to get dump cat and cat to over diff made (you would still save some $$$) Edited 17/04/09 11:58 AM by djkice Link to comment Share on other sites More sharing options...
FG-XR6T Member 177 Member For: 16y 7m 14d Gender: Male Location: Melbourne Posted 17/04/09 12:38 PM Author Share Posted 17/04/09 12:38 PM thanks guys.... ill just change a muffler for a hotdogg for now to get more sound ($140) and ill save up for exhaust, injectors and tune.Thanks Link to comment Share on other sites More sharing options...
PSI40T Member 448 Member For: 17y 8m 29d Posted 17/04/09 12:59 PM Share Posted 17/04/09 12:59 PM sorry to high jack the thread but at what power do the stock fg xr6t injectors max out?? Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 3m 26d Gender: Male Location: Perth, W.A. Posted 17/04/09 01:15 PM Share Posted 17/04/09 01:15 PM 280 Link to comment Share on other sites More sharing options...
tinyplums Member 1,080 Member For: 16y 3m 12d Gender: Male Posted 17/04/09 07:50 PM Share Posted 17/04/09 07:50 PM what dump did you use? custom or the bf ones fit? Link to comment Share on other sites More sharing options...
PSI40T Member 448 Member For: 17y 8m 29d Posted 18/04/09 02:58 AM Share Posted 18/04/09 02:58 AM 280RWKW DAM.... cause I already have the xr8 lower air box and snorkel... getting a high flow cat installed this week, and getting it tuned on friday.... I might go over 300rkw .. lol can the tuner detune it so it runs withing the injectors limit with these mods? Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 3m 26d Gender: Male Location: Perth, W.A. Posted 18/04/09 05:33 AM Share Posted 18/04/09 05:33 AM You will need injectors or you will run lean running higher power... or you could just tune it at 280rwkw, disregarding the potential power... or just get injectors..I run asia(not quite china) spec FG 4" x-force dump - almost 5" cat - 4" pipe - over the diff - splits to 2x3".... so pretty much from the 2x3" starts it's actually a custom exhaust(which will probably end up getting sent to get made as the X-Force Quad System)Hence why I have my over diff - rear muffler - tip section for sale... It's the only FG X-Force system in existence atm In the end of all this, I will have a pretty sweat exhaust setup. Plus bulk cash :D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now