ardi Member 117 Member For: 16y 9m 20d Posted 15/01/10 12:55 AM Share Posted 15/01/10 12:55 AM Has anyone done anymore with this??? Or has anyone heard of kits that spra nitros onto the face of the I/c? If so where they can be purchased?? Link to comment Share on other sites More sharing options...
Evil F6 Donating Members 830 Member For: 19y 1m 22d Gender: Male Location: Sydney Posted 15/01/10 03:10 AM Share Posted 15/01/10 03:10 AM I could be wrong but I thought it was the evaporation that cools the cooler down therefore temp if water irrelevant???Yep, you want a superfine atomisation of the spray to maximise the effect. The latent heat of evaporation is huge, which is why the cooling is so effective. Link to comment Share on other sites More sharing options...
GR8XR6 ANGEL EYES Silver Donating Members 1,683 Member For: 16y 7m 9d Gender: Male Location: SE Suburbs, Melbourne Posted 15/01/10 03:58 AM Share Posted 15/01/10 03:58 AM Has anyone done anymore with this??? Or has anyone heard of kits that spra nitros onto the face of the I/c? If so where they can be purchased??Cannot find decent nozzles as yet before I start playing around! Anyone done anything more?? Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 9m 15d Gender: Male Location: adelaide hills- 'race air' central Posted 15/01/10 09:29 AM Author Share Posted 15/01/10 09:29 AM nah, I kinda put it on the back burner for a while. been too busy with other mods- ie red angel eyes Link to comment Share on other sites More sharing options...
dalts Member 755 Member For: 18y 9m 5d Gender: Male Location: brisbane Posted 15/01/10 09:47 PM Share Posted 15/01/10 09:47 PM ive got a couple of nozzles of my water meth kit spare that I wont ever use,they atomize extremely well,just pm me if anyone wants them and ill post them offcheers lee Link to comment Share on other sites More sharing options...
45T-XR Donating Members 417 Member For: 17y 11m 25d Gender: Male Location: Gladstone, Queensland Posted 30/09/10 06:34 AM Share Posted 30/09/10 06:34 AM only prob is trying to keep the water cool.I seen some dodgy setup with washer bottles and sprayers. waste of time I recon.how hot days are we talkin anyway.Most intercoolers should be fine with 25-30 degree days.Ive played around with a few of these, with jet/nozzles sizes etc, I dont thing the temp of the water itself would be a huge problem, its more to do with the quantity of water sprayed over the cooler and not enough does nothing, and too much water does a similar thing, as you need the water to evaporate which is what pulls the heat out of the cooler, The first set up I made to test the idea was primitive and used garden srinkler type nozzles which were a "spray" pattern, it worked sh*thouse, I then went to a "mist" set of nozzles and bam, a thousand percent better. Link to comment Share on other sites More sharing options...
Twinpiston Member 133 Member For: 18y 9m 1d Gender: Male Location: Brisvegas Posted 12/12/10 10:38 PM Share Posted 12/12/10 10:38 PM Looking at doing this for my Territory, after a few hours on the dyno and inlet temps reaching 170 degrees Is there any further you guys have gone? Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 5m 27d Gender: Male Location: Townsville Posted 12/12/10 11:25 PM Share Posted 12/12/10 11:25 PM Dalts had the nozzles for free back in Jan as his post suggests. They are premo nozzles but think you would need a decent pump to atomise the water through them as the pump that comes with the water/meth kit is 4.5lt/min at 220psi.Better off buying this kit like I did while the dollar is still good-My linkRay076 and I got ours for Aus $360 delivered each as we offered US$270 each for them so try even lower I suppose! Link to comment Share on other sites More sharing options...
Twinpiston Member 133 Member For: 18y 9m 1d Gender: Male Location: Brisvegas Posted 13/12/10 01:02 AM Share Posted 13/12/10 01:02 AM Thanks bjc, looks like a good kit, except for the postage..... $110 to Oz Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 5m 27d Gender: Male Location: Townsville Posted 13/12/10 04:48 AM Share Posted 13/12/10 04:48 AM Yeah I know the postage is crap but the kit is the cheapest out of all the snow kits on ebay. They sucker you in by coming up first as being the cheapest! that's why we bought two as the second one was half price delivery and offered $30US less each per kit.Its so fcking hot here in Townsville atm that I hope the kit will show its true colours and shine Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now