Toecutter Member 182 Member For: 17y 8m 4d Gender: Male Location: Melbourne Posted 11/04/09 02:52 AM Share Posted 11/04/09 02:52 AM Hey guys, I'm running an xrt with 317rwkw, rapid cold air under battery, rapid cooler and piping with no BOV.I'm thinking of giving a BOV a trial to see if I can notice any difference in lag etc.I'm having a look at the ones Plazmaman are offering, adjustable.Is anyone here running a similar setup to me with one of these BOV's or similar?I'm after a video or sound clip of what it will sound like with similar mods..Cheers Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 23d Gender: Male Location: SW Sydney Posted 11/04/09 03:43 AM Share Posted 11/04/09 03:43 AM Speak to Rapid mate, he's running one (or the last time I saw his car) and I think he might have a vid of it too... Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2m Gender: Male Location: Melbourne Posted 11/04/09 06:06 AM Share Posted 11/04/09 06:06 AM You'll notice it with gearchanges in a manual. The response when you engage the clutch again is super fast with no BOV and a little laggy with a BOV. You have an auto so I dare say you won't notice much difference unless you're circuit racing and come off an on throttle quickly for sharp corners or something like that. You'll definately get rid of the long-arse flutter running a plumbed back BOV Link to comment Share on other sites More sharing options...
lukexr61988 Member 191 Member For: 16y 5m 14d Gender: Male Location: NSW sydney Posted 11/04/09 06:34 AM Share Posted 11/04/09 06:34 AM iv got a rapids v3.5 kit and a plazmaman bov, cant comment about the lag and so on because iv only ever ran the cooler kit with the bov, it sounds pretty good though I think, most of the time just sounds like tutupppssssshhh but with high revs just ppsssshhh will try and get a sound clip for ya mate Link to comment Share on other sites More sharing options...
Toecutter Member 182 Member For: 17y 8m 4d Gender: Male Location: Melbourne Posted 12/04/09 02:00 AM Author Share Posted 12/04/09 02:00 AM Yeah no worries, thanks mate. So yours is vented to atmo? Can it be adjusted to plumb back? Link to comment Share on other sites More sharing options...
lukexr61988 Member 191 Member For: 16y 5m 14d Gender: Male Location: NSW sydney Posted 13/04/09 12:55 AM Share Posted 13/04/09 12:55 AM its not a dual port but you cant change the little trumpet to a fitting to run a hose off and can use it as a plum back Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 8m 11d Gender: Male Location: Sydney NSW Posted 14/04/09 08:17 AM Share Posted 14/04/09 08:17 AM (edited) This vid the car has Plazmaman P1 Atmo bov, & rapid 4inch intake, stock turbo.This one the car has same intake & turbo, but stock bov open ventedAnd no bov, with under battery CAI, stock turbo. Edited 14/04/09 08:27 AM by RAP1D Link to comment Share on other sites More sharing options...
Toecutter Member 182 Member For: 17y 8m 4d Gender: Male Location: Melbourne Posted 16/04/09 01:52 AM Author Share Posted 16/04/09 01:52 AM Mate how do you get your stock BOV to vent like that, I did the mod and it still flutters HEAPS and only vents a tiny bit. Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 8m 11d Gender: Male Location: Sydney NSW Posted 16/04/09 03:09 AM Share Posted 16/04/09 03:09 AM the 4inch intake doesnt flutter as much as the under bat cai, plus the gear changes are pretty quick in the vid.Did you have the bov on back to front or something? Link to comment Share on other sites More sharing options...
Toecutter Member 182 Member For: 17y 8m 4d Gender: Male Location: Melbourne Posted 17/04/09 12:44 AM Author Share Posted 17/04/09 12:44 AM Nah I had it on the right way, just vents a little bit of air but flutters heaps still Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now