AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 9m 12d Gender: Male Location: Canning Vale, W.A Posted 25/10/13 05:29 AM Share Posted 25/10/13 05:29 AM Holysh*t you had some bad luck mate. I got pulled over on the way to power cruise, only after market thing they asked me about was exhaust because everything in the engine bay is black lol. Lucky they didnt see the front mount.. they tried to catch me out 'got permits for these mods?' 'Permits? All I have is an intake and an exhaust' at this stage I could clearly see they had no idea what they were looking at. 'Oh okay go check the licensing center to see if you need permits' Also No rubber in guards cause im a good boy ... Saving lives, 1 car mod at a time. Dj if it ever happens again let me know, got a mate that works at a pit in Rockingham. It'll be worth the drive to get it taken off with no dramas (minus the 80$) plus maybe a carton for him. 1 Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 5m 18d Gender: Male Location: Perth, W.A. Posted 25/10/13 06:19 AM Share Posted 25/10/13 06:19 AM Yeah Steve, most were to extend my sticker T_TDamn!!!! Probably could have saved me a bucket load of cash if you weren't dormant on the forums when I needed to go over Oh well in the past now. You got lucky I think :(Doubt I will have dramas again, especially if I was to mod I would probably go stealth. Black cooler / as factory looking mods as possible.I saw on XFT's facebook page that they did a G6ET recently which made like 360rwkw on stock turbo, stock turbo back exhaust, airbox. Had only like stage 2 process west cooler, pw dual submerged surge, injectors, tune on e85 ~~! I think this will be the ideal power level especially with the responsive "smaller comp wheel turbo". This would be the ultimate sleeper as I doubt any mods would be visible and impossible for anyone to pick also confuse people as to how the hell it makes 500rwhp???I know someone else on forum with similar power on the "smaller comp wheel turbo" ran a 10.89 and a little less power than that.TBH as a daily driver out of all the power levels I had, I enjoyed the mid 300's the most, so if I was to do it all over again I would do similar to that G6ET, maybe truetrac/bushes + tailshaft.Different to your approach of "WANT MORE POWAAARRR" orrr Steve's "WANT MORE SKIIIIIIIIIIIDSSSS"................. *on private roads* 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 17d Gender: Male Location: Perth Posted 25/10/13 06:25 AM Share Posted 25/10/13 06:25 AM Thats the plan for my F6 GT3576 mid 300's on E85 and skiiiiiiids 1 Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 5m 18d Gender: Male Location: Perth, W.A. Posted 25/10/13 06:34 AM Share Posted 25/10/13 06:34 AM (edited) Just for you, looks like what ~17psi@2500 down to 12psi in top end!!! Pretty sure that turbo is maxed and can't make anymore than 357rwkw. I've seen many around on forums with much more done (4" exhaust, turbo side intake, ported housing/actuator) and still making similar. Not sure about GTX though, suppose 390-400rwkw, I think that will be awesome but that's the power level where sh*t starts to broke. Edited 25/10/13 06:38 AM by djkice 2 Link to comment Share on other sites More sharing options...
skidxr6t skids Donating Members 2,754 Member For: 12y 12d Gender: Not Telling Posted 25/10/13 06:35 AM Share Posted 25/10/13 06:35 AM (edited) I appreciate the fact last time I got pulled over they gave me the chance to tidy up my driving style and purchase some new tyres rather than a yellow sticker and a date with the magistrate.It seriously must be something about the cops being jealous, as my car isn't modified. Edited 25/10/13 06:48 AM by johnxr6t Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 3m 18d Gender: Male Location: Perth, WA Posted 25/10/13 06:47 AM Share Posted 25/10/13 06:47 AM GT3576 ftw! Due to the lack of E85 in the deep south and sh!thouse fuel economy, mine will be maxed out on 98RON by the look of it. 1 Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 5m 18d Gender: Male Location: Perth, W.A. Posted 25/10/13 06:58 AM Share Posted 25/10/13 06:58 AM (edited) don't be weak, buy old ute/van and a few drums, fill up and hold your own supply :Dor do like e40 half e85 half 98. probably dont need to go that crazy on fuel supply with that either. Edited 25/10/13 07:11 AM by djkice Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 9m 12d Gender: Male Location: Canning Vale, W.A Posted 25/10/13 07:28 AM Share Posted 25/10/13 07:28 AM Get the gtx3576! Or maybe a precision 6262?? Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 5m 18d Gender: Male Location: Perth, W.A. Posted 25/10/13 11:56 AM Share Posted 25/10/13 11:56 AM Want reliable. Those two would push 400+ where sh*t starts to break plus $$$$Seems like a common trend for 400+ from observing the forum. 330-360 seems like the sweet spot.... Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 17d Gender: Male Location: Perth Posted 25/10/13 12:09 PM Share Posted 25/10/13 12:09 PM Agree. 500 to 530rwhp seems to be the happy spot. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now