GreenXR6T Donating Members 630 Member For: 19y 4m 20d Gender: Male Location: NSW Posted 25/05/09 11:02 AM Share Posted 25/05/09 11:02 AM THAT'S HUUUUUGE.....Will it fit under the bonnet? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 23d Gender: Male Location: Adelaide Posted 25/05/09 11:06 AM Share Posted 25/05/09 11:06 AM f*ck my dog dude your serious hey that's gunna haul serious ass Link to comment Share on other sites More sharing options...
Ace blind leading the blind Member 3,657 Member For: 16y 4m 12d Gender: Male Location: Mt Alford, Queensland Posted 25/05/09 11:08 AM Share Posted 25/05/09 11:08 AM lol might have make an imprint of the top of the turbo in the bonnet I think steph Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 8m 3d Gender: Male Location: Sydney NSW Posted 25/05/09 12:14 PM Share Posted 25/05/09 12:14 PM that's a big unit!Looks like my 45 but with a bigger comp combo... is that an 80mm exducer? Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 5m 5d Gender: Male Location: Broady, Melbourne Posted 25/05/09 03:53 PM Author Share Posted 25/05/09 03:53 PM The comp on this thing did scare me a bit. Fitting is going to be a bit fiddly but Geoff from Snort will find a spot I'm sure.Chris you mean the turbine exducer yeah? I know the comp exducer is 112mm but not sure about the turbine side. I'll have to make a call. Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 5m 5d Gender: Male Location: Broady, Melbourne Posted 25/05/09 04:18 PM Author Share Posted 25/05/09 04:18 PM Pretty sure it's an 83mm exducer on the compressor side. Link to comment Share on other sites More sharing options...
XRSics Donating Members 325 Member For: 16y 3m 16d Gender: Male Location: Melbourne Posted 26/05/09 01:09 PM Share Posted 26/05/09 01:09 PM a hole in the bonnet is gunna suck in small animals and children with that thing. 600 rwkw daily driver lol!!cant wait to see the outcome, so so jealous.. Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 5m 5d Gender: Male Location: Broady, Melbourne Posted 26/05/09 11:41 PM Author Share Posted 26/05/09 11:41 PM (edited) I just wanted to comment about tuning. People have been asking me who will be tuning the car. As most would know, when we get to these power levels and have very different hardware to the factory car, it becomes more difficult to tune using the factory ECU. I might be stupid, but one of the things I want to do it take the factory ECU as far as possible, or as far as someone is willing to take it before they pull all of their hair out. If we can't get to the target of 1000hp, an Autronic is probably in the mix. This of course requires a lot of time and input by the tuner. And from what I'm being told and what I know of how long a process it takes to dyno, tweak the tune and flash the BA ECU, it is a very time consuming. And to be perfectly honest, I didn't want to fork out a gazillion dollars to do this. So I've made this comment on another forum:There is one candidate it's been narrowed down to. We've met, talked and have come to a basic agreement but we still need to formalise details. The arrangement will not only be for tuning. It will also mean a sponsorship for the car and the car will be signed when it runs and is involved in events. At this point it looks like this will happen but until it does, I will not mention who it is. Edited 26/05/09 11:45 PM by straughsberry Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 22y 29d Gender: Male Location: Sydney Posted 27/05/09 12:29 AM Share Posted 27/05/09 12:29 AM Personally I wouldn't use an Autronic unless you see a Ford running big injectors on a high powered car, and personally witness the starting, idle and deceleration to idle.My advice is don't take anyone's word for it, nor accept the "it should be OK", or "we should be able to sort it out" response.There can be a lot of pain, expense and time wasted being a trail-blazer.I can talk from experience.I have just in the last month ditched the Autronic in my STi, (a full relacement ecu, not piggyback), which could not handle 850cc injectors at idle, and I had 3 different tuners try to fix it. I got sick of the car cutting out when coming to a stop, being very dangerous, and idle hunting. It could not be used as a daily driver in that state. Also, from what I've been told the maker is no longer interested in looking into issues with that product. I moved to a new ecu that is far superior, with good support.Seriously I doubt you'd get more benefit from the Autronic over the Ford flashed ecu.With a big enough turbo, cams, IC, good exhaust, and injectors you should be able to get 600rwkw with the Ford ecu. Don't necessarily blame the ecu, as there may be other components that are the botteneck.Brian Link to comment Share on other sites More sharing options...
kevo Member 286 Member For: 17y 1m 6d Gender: Male Location: Wanneroo, Perth WA Posted 27/05/09 12:55 AM Share Posted 27/05/09 12:55 AM lol might have make an imprint of the top of the turbo in the bonnet I think stephhahaha, actually come to think of it that would look awesome! V8's have the engine bulge, you have a trubo buldge to fit the compressor... nice Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now