Jump to content

Xforce Exhaust Thread


THEMESHMAN260

Recommended Posts

  • Member
  • Member For: 20y 8m 1d
It sounds to me that if you are after an exhaust to run on an otherwise STOCK car, then these sound like the go. If you are planning future mods I would go something 3 1/2" or bigger(as long as you get a edit/piggyback to tune properly aswell).

Chris

<{POST_SNAPBACK}>

goobs I think you will find that the system is better than that and will suit over 90% of xr6t's as I am confident of it suporting over the 400rwkw!!!

<{POST_SNAPBACK}>

Dynowog,

When testing the exhaust system, the most I got out of this system was 270 rwkw -however depending on tune/dyno etc u may be about to hit 300 MAX. After this we did a full customer 3.5" system to obtain my current 300 + rwkw (im running aps gear in the car also).

As for the claim of exhausts being sold for 850 .... the supplier of the exhaust knows of all systems that have been sold to date, and nobody is selling them that cheap, unless it is an imitation system or unless they are loosing money on the systems.

Themeshman260 - The exhausts are good quality and they work. Like I mentioned previously, I should know, they were tested on my car. The cat and muffles used in the system are Xforce (their own cats/mufflers) and the they produce a good note. Are you in sydney mate?? If so PM me, im going to my mates exhaust shop on sat, your more then welcome to meet up with me, ill show you my current quad system and you can see the Xforce systems in flesh (and meet the owner).

Regz,

Dean

<{POST_SNAPBACK}>

Dean

Would I be right in saying that the dump pipe displayed on the website was just a one off, as they dont sell them by all accounts. If so is the system still a noticable improvement over the stocky without the dump pipe?

Also given DW comments re the drop in price is it safe to assume that we can get the S/S system for $850 or do you still believe it will some sort of copy?

Cheers

Steve

Link to comment
Share on other sites

It sounds to me that if you are after an exhaust to run on an otherwise STOCK car, then these sound like the go. If you are planning future mods I would go something 3 1/2" or bigger(as long as you get a edit/piggyback to tune properly aswell).

Chris

<{POST_SNAPBACK}>

goobs I think you will find that the system is better than that and will suit over 90% of xr6t's as I am confident of it suporting over the 400rwkw!!!

<{POST_SNAPBACK}>

Dynowog,

When testing the exhaust system, the most I got out of this system was 270 rwkw -however depending on tune/dyno etc u may be about to hit 300 MAX. After this we did a full customer 3.5" system to obtain my current 300 + rwkw (im running aps gear in the car also).

As for the claim of exhausts being sold for 850 .... the supplier of the exhaust knows of all systems that have been sold to date, and nobody is selling them that cheap, unless it is an imitation system or unless they are loosing money on the systems.

Themeshman260 - The exhausts are good quality and they work. Like I mentioned previously, I should know, they were tested on my car. The cat and muffles used in the system are Xforce (their own cats/mufflers) and the they produce a good note. Are you in sydney mate?? If so PM me, im going to my mates exhaust shop on sat, your more then welcome to meet up with me, ill show you my current quad system and you can see the Xforce systems in flesh (and meet the owner).

Regz,

Dean

<{POST_SNAPBACK}>

Dean

Would I be right in saying that the dump pipe displayed on the website was just a one off, as they dont sell them by all accounts. If so is the system still a noticable improvement over the stocky without the dump pipe?

Also given DW comments re the drop in price is it safe to assume that we can get the S/S system for $850 or do you still believe it will some sort of copy?

Cheers

Steve

<{POST_SNAPBACK}>

Also given DW comments re the drop in price is it safe to assume that we can get the S/S system for $850 or do you still believe it will some sort of copy?

the system can be done for that if the workshop infact only wanted to make $20 on each but hey sydney prices may be better due to less freight!!!!

from xforce's dealer so genuine but I cant see to many workshops doing it for that unless it were a group buy or they charged heaps for install?

ps can we stop talking prices as I dont want to get in trouble!!!

Link to comment
Share on other sites

  • Member
  • Member For: 19y 11m 17d
  • Gender: Male
  • Location: Sydney
It sounds to me that if you are after an exhaust to run on an otherwise STOCK car, then these sound like the go. If you are planning future mods I would go something 3 1/2" or bigger(as long as you get a edit/piggyback to tune properly aswell).

Chris

<{POST_SNAPBACK}>

goobs I think you will find that the system is better than that and will suit over 90% of xr6t's as I am confident of it suporting over the 400rwkw!!!

<{POST_SNAPBACK}>

Dynowog,

When testing the exhaust system, the most I got out of this system was 270 rwkw -however depending on tune/dyno etc u may be about to hit 300 MAX. After this we did a full customer 3.5" system to obtain my current 300 + rwkw (im running aps gear in the car also).

As for the claim of exhausts being sold for 850 .... the supplier of the exhaust knows of all systems that have been sold to date, and nobody is selling them that cheap, unless it is an imitation system or unless they are loosing money on the systems.

Themeshman260 - The exhausts are good quality and they work. Like I mentioned previously, I should know, they were tested on my car. The cat and muffles used in the system are Xforce (their own cats/mufflers) and the they produce a good note. Are you in sydney mate?? If so PM me, im going to my mates exhaust shop on sat, your more then welcome to meet up with me, ill show you my current quad system and you can see the Xforce systems in flesh (and meet the owner).

Regz,

Dean

<{POST_SNAPBACK}>

Hi Dean

Is the owner at best muffler developing a new system for the XR6 ? with a 4 inch dump and CAT ?

Link to comment
Share on other sites

  • ASHA - Anti Stooge Hunter Association
  • Member
  • Member For: 21y 7m 30d
  • Location: Sydney Bronx :)

Dynowog - Like I said, tests on my car showed that with this 3" system, the car would not go past 270Kw ... safely and reliably I should add. If people have other results im sure there will also be other factors that effect the results. As for the CRD price, agreed, perhaps it should be dropped....im not sure myself how they can do it so cheap, but you never know.

Jordak & Fr33dy- Yes you are right, the dump pipe currently on my car/on the website, was a one off, and at this stage is still being tested. We will test a 4 or 4.5" dump pipes soon and see how they impact the performance/driveability/power and torque of the car. For this reason, the pipe as shown on the site has still not been released. We will also be doing some tests on the 4" Cats.

Jordak - I am not sure about the CRD system, I have not seen the system so I really cant answer your question in regards to whether or not it is a copy.

Regz

Dean

Link to comment
Share on other sites

  • Member
  • Member For: 19y 11m 17d
  • Gender: Male
  • Location: Sydney

I will wait to this system is out and see the result no need to invest in a Exhaust system twice if one day I decide to go beyond the 280RWKW mark.

keep us posted on the development dean.

Freddy

Link to comment
Share on other sites

  • Member
  • Member For: 20y 9m 13d
  • Location: Penrith NSW
Dynowog - Like I said, tests on my car showed that with this 3" system, the car would not go past 270Kw ... safely and reliably I should add. If people have other results im sure there will also be other factors that effect the results. As for the CRD price, agreed, perhaps it should be dropped....im not sure myself how they can do it so cheap, but you never know.

Jordak & Fr33dy- Yes you are right, the dump pipe currently on my car/on the website, was a one off, and at this stage is still being tested. We will test a 4 or 4.5" dump pipes soon and see how they impact the performance/driveability/power and torque of the car. For this reason, the pipe as shown on the site has still not been released. We will also be doing some tests on the 4" Cats.

Jordak - I am not sure about the CRD system, I have not seen the system so I really cant answer your question in regards to whether or not it is a copy.

Regz

Dean

hey dean,

was it the exhaust or something else holding back to 270rwkw.

I just ask because mine feels like I have plenty left before max

regz

mark

<{POST_SNAPBACK}>

Link to comment
Share on other sites

I dont think it is a matter of the price dropping it is just a fact that we are selling the exhaust system for a realistic price.

CRD

<{POST_SNAPBACK}>

Today l spoke to Lance at CRD he answered the questions l was after about the Xforce system they were very help full they have my order for the exhaust and for $890 delivered. once l get it l will see if it is anygood it comes with a 10 year warranty, l think on parts which l thought was very good. I work for Fords and my brother works for the immition control and he will know whether it's any good

Link to comment
Share on other sites

  • Member
  • Member For: 20y 8m 14d
  • Location: Mildura
Aren't the people making over 300rwkw with stock exhaust?

<{POST_SNAPBACK}>

Yes,

I don't see the need to replace something from the factory that has been proven by Nizpro and many others to be capable of producing 300rwkw.

Better value would be to put money into larger intercooler or transmittion mods before going to 300rwkw anyway. :blush:

macka

Link to comment
Share on other sites

Guest mufflerman
  • Guests

I am the owner of Best Mufflers at Carlton. I have been fitting performance exhaust systems on many different types cars for over twenty years, see www.bestmufflers.com/customers_cars for a few examples

I have been using xforce products for around five years, in this time I have fitted thousands of xforce mufflers and exhaust systems.Thanks to dean [forum member] we tried many different combinations of exhaust systems on his xr6 , I supplied the exhaust systems dean supplied the dyno results. by doing this I could be sure the product I was selling was going to produce a quality sound and also produce power. If you own a xr6 turbo the 3" xforce system is by far the best system available, around 20kw increase is pretty good without ecu mods and if you do a few mods the exhaust will do the job to around 270/300kw , if you have more power the 3 1/2" system will be available soon

If anyone is interested and live in the sydney metro area you can come in and try a mild steel system for one week, [booking required] if not completely happy you can return your car and the factory system will be reinstalled and your money fully refunded or you can upgrade to the full stainless steel system. This offer is available for a limited time so be quick. contact me Chris through www.bestmufflers.com for prices for forum members only.

some people are quoting very cheap prices,the question is, can they supply the goods ??

www.bestmufflers.com

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'