Jump to content

Recommended Posts

  • blind leading the blind
  • Member
  • Member For: 16y 8m 9d
  • Gender: Male
  • Location: Mt Alford, Queensland
  bentles said:
yeah mine makes the same noise I think. once warm if I and at lights in neutral and take foot off clutch it makes the sound discribed. as soon as I put clutch in it quiet as.

this cant be fixed?

go the option 3 sunny. ordered mine today.

cheers dylan.

that's sounds like the old school throw out bearing noise - but that couldnt be right could it :huh:

  • Member
  • Member For: 17y 18d
  • Gender: Male
  • Location: Ipswich
  Sundeep said:
Cheers for your help Senna.

Much appreciated.

I'm looking in to some mods currently and have found that I will prob need a clutch straight away. Looking in to Mal Wood Option 3 with 11" flywheel.

I've got 310rwkw and am still using the stock clutch and have been for a while. Just dont launch hard off the line and you will be fine

  • Need more power. Now taking donations.
  • Member
  • Member For: 16y 2m 23d
  • Gender: Male

^Really? I've only got 250rwkw and I find it slips in high gears if there is an incline and WOT. partly due to the 13 psi at 3000rpm and the slab of torque it has to deal with before trailing back to 10 psi....

Solution? change to a lower gear, and avoid peak boost.... that is until I can convince the minister for finance that an option 3 clutch is needed...

  • Need more power. Now taking donations.
  • Member
  • Member For: 16y 2m 23d
  • Gender: Male

As for the gearbox noise... I was driving at night with my wife, radio off, no air-con, just peace and quiet... and she says "whats that...noise... it sounds like a kettle boiling...." Took me a little while to figure out what she was hearing... :laughing:

  • Member
  • Member For: 16y 8m 15d
  • Gender: Male
  • Location: Fremantle, W.A.

There's another oil which may be worth a try. It is made specifically for the T56 gearbox and is called mainlube (synthetic solid boundary). Google that. Apparently it is expensive but lasts up to a claimed 100km.

  • Member
  • Member For: 16y 7m 21d
  • Gender: Male
  • Location: melbourne

ok all im doing my clutch this weekend, now I will doing a oil change on my t56 with transmax z, do you boys just fill till comes out the fill hole or do you's put in more or what?

  • Member
  • Member For: 18y 2m
  • Gender: Male
  • Location: Sunshine Coast QLD

In 6 cyl, Ford recommends 4.8 ltrs. That's 1ltr more than what they recommend to fill the same box takes on an V8. They over fill it on the 6 to try to quieten it down apparently as it is more prone to the roll over noise.

To get 4.8 ltrs into her, you will have to remove the reverse signal switch and fill it from there, or jack up the passengers side so the car is on an angle and fill it from the normal place.

Edited by craiginmackay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'