Jump to content

Ba Xr6 Stereo


brent1100

Recommended Posts

  • Member
  • Member For: 15y 10m 2d
  • Gender: Male
  • Location: perth

hey guys.

ive got a 03 ba xr6 ute and im putting a new deck down the bottom of the standard stereo and im stuck with the speaker wires. where do the speaker wires plug in to the back of the standard deck, and can I cut them out and exstend them to reach my new deck?

any help would be good. :blink:

thanks

Brent

Link to comment
Share on other sites

  • Mmmmm......BOOST
  • Member
  • Member For: 17y 6m 22d
  • Gender: Male
  • Location: central coast

don't think you can hook them straight into the back

as said you can find the wires in the front kick panels 3 sets on the left side and 1 on the right

but sutting and hooking the deck to these disables the sound from the factory unit and you loose steering wheel controls

have the wires written down some where I will go have a look

Link to comment
Share on other sites

  • Mmmmm......BOOST
  • Member
  • Member For: 17y 6m 22d
  • Gender: Male
  • Location: central coast

no responsability taken if you stuff this up

drivers kick panel ,

front right speaker grey with green stripe and grey with black stripe

passenger kick panel

left front speaker orange with light green and orange with black

right rear speaker blue with red and blue with black

left rear speaker pink with green and pink with black

when you strip the wires the copper wires are the nagative ones

you will find these wires coming out of the large conector closest to the door opening down near the floor

PLEASE make sure you know what your doin before you start cutting wires

Edited by our06t
Link to comment
Share on other sites

  • Go Pies!!!
  • Donating Members
  • Member For: 16y 9m 2d
  • Gender: Male
  • Location: Vic Somewhere - Sometimes NSW

our06t is right...

if your not sure - GO TO A AUDIO SHOP/INSTALLER! PLEASE!!!!!!

Might be worth using test light/MM to double check...

:clap:

Link to comment
Share on other sites

  • Member
  • Member For: 18y 2m 9d
  • Location: Mackay QLD
drivers kick panel ,

front right speaker grey with green stripe and grey with black stripe

passenger kick panel

left front speaker orange with light green and orange with black

right rear speaker blue with red and blue with black

left rear speaker pink with green and pink with black

when you strip the wires the copper wires are the nagative ones

you will find these wires coming out of the large conector closest to the door opening down near the floor

PLEASE make sure you know what your doin before you start cutting wires

the colour are spot on. the negative speaker wire have the black trace on them. they are in a big orange connector behind the kick panel. Make sure your run your speaker wires into the SPEAKER side of the wires you cut. Not the wires that lead back to the ICC.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'