Jump to content

368.7 Rwk


bowie

Recommended Posts

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

thought that might of been the case. All the same good power with what he's working with!!!

On a side note & can send via pm if you please, the setup im running should it be a little more boost friendly, as in 21psi?

With a stock bottom end I wouldn't be pushing 21psi through her mate...

As Rapid said as well, these turbo's are out of their efficiency range at that sort of pressures, what you have now with a little more boost held up top will see you achieve your goal :beerchug:

this was just to prove that heinrich's dyno was on par with another dyno (ie no massive discrepancy) and a fair read out I would say dude :blush:

There are too many variables involved to 'compare' 2 different dynos. As it has already be shown in this thread, Heinrich's & KPM's dyno's have been compared on a few different occasions with differing results. They didn't all have a 6.996785388kw increase or decrease...

by all means, prove me wrong.... go run it down the 1/4, MPH doesnt lie. (unless of course the timers stop at the 1000ft mark!!!! :blink: )

:bye:

Mph would be a better power indicator but really who cares? Do you get your dyno sheet/timesheet out & look at in awe when sitting at home? Do you pull them out & show everyone around you? Do you pull them out & show it to the guy you have a little play with at a set of lights?? No you don't but I bet you get a smile on your face every time you put the right foot down :blush:

Just keep enjoying the car & don't worry about dyno figures/track times. So long as you're happy with the performance that's all that matters :blink:

Enjoyment > MPH > Breakfast cereal choice > Dyno figures

Edited by 03XR6T
Link to comment
Share on other sites

  • Cruise Control
  • Member For: 19y 23d
  • Gender: Male
  • Location: Adelaide

changed has it? if not well the first 2 10 second phoons,but who cares I have always said I think Bruces dyno is a little downhill but only 10 or so kw, it's the same jealous people that have to have a dig at the bloke who proudly putting up his sheet...........does it make them feel any better?

Link to comment
Share on other sites

My mph was 126 with 409rwkw but I did have issues with 3 - 4 change & had to back off to get it in gear. Shows that dyno figures differ doesn't it?

On the standard dump statement, didn't the quickest F6 run ETM manifold? That would mean it couldn't use factory dump I think?? I'm not 100% on that & I am probably wrong but just thought I'd throw it out there.

Either way I bet the car shreds tyres & that's what counts. Post some vids up :w00t2:

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 16y 7m 18d
  • Gender: Male
  • Location: Loitering in SEQ

the fastest bf using the zf box is. Numberplates F6FORD & user name on here is FSIX 10.8 @ about 130mph. Im sure but the other is mauz but I dont know anything about the exhuast. Type into youtube spoolman & you'll see his run. (sorry not computer savy not sure how to put a link up)

Dean, Spiro will be tuning it for me when he comes up next week. After speaking to where I get it done they said there not exactly sure what there gonna do they'll just take it one step at a time & see where it takes it. Last time they went pretty moderate thry recon so theres plenty of room to move. I spose we wont know until they put it on there & tinker. Spiro tuned those 2 typhoons that have gone sub 10.9 so if anyone can get it moving it would be him. Cant wait for the final result

Edited by qik1
Link to comment
Share on other sites

  • Cruise Control
  • Member For: 19y 23d
  • Gender: Male
  • Location: Adelaide
My mph was 126 with 409rwkw but I did have issues with 3 - 4 change & had to back off to get it in gear. Shows that dyno figures differ doesn't it?

On the standard dump statement, didn't the quickest F6 run ETM manifold? That would mean it couldn't use factory dump I think?? I'm not 100% on that & I am probably wrong but just thought I'd throw it out there.

Either way I bet the car shreds tyres & that's what counts. Post some vids up :w00t2:

what box you got? my mate is having the same issue with his ZF and Spoolmans F6 runs aps zorst with stock dump and stock plenum/manifold

Link to comment
Share on other sites

  • Legendary member!!
  • Donating Members
  • Member For: 17y 11m 7d
  • Gender: Male
  • Location: Dianella, West Oz
it's the same jealous people that have to have a dig at the bloke who proudly putting up his sheet...........does it make them feel any better?

I hope that wasnt directed at me lol...

If you have a look through any of my posts in this section, you will not find any posts of me having a dig lol.

As mentioned, I would be happy to eat humble pie and be proven wrong if the time backs up the dyno figure...

The power just doesnt sound right for the mods to me!

If we all believed what people posted on here without objecting to something that doesnt sound right, we'd all still be thinking that Worm has run an 8 sec pass in a manual, Monza coolers are fantastic and some of us are running 350rwkw with stock injectors lol.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'