Guest Guests Posted 30/01/09 05:13 AM Share Posted 30/01/09 05:13 AM I can see where SCT are coming from, they are still a business and they saw their business to be loosing potenial money. I think the way they have handled everything is shocking, a good business would have put steps into place to start to phase out flash 1, then after that start phasing out flash 2, then introduce their new product. This still would have kicked up a big fuss but would have been taking alot better than what they have done. If they phased out their products over time, they may still have some customers left but what they have done, surely they will end up with very little customers if any. It also comes down to, they are still the best product for our car, even better than $3000 + stand alone ECUs, and SCT know it. So basically they can do what they like cause they know they have the best bang for buck ecu for our cars. I hate to say it but if this does not get sorted, I will have to buy one for my car as I cant see anything on the market doing a better job.I do agree with previous comments though, an exchange or change over for the old box + a bit of money would have been good. Im sure many people would have taken that oppertunity and swapped over to the new xcal3. I guess its a case of watch this thread.AndrewSniper & HP Tuners both offer similar software so don't be too quick to buy a XCAL3 mate. Granted, SCT are much more advanced but they have been around longer. If HPT & Sniper are smart they'll step up their game & develop their software to the likes of SCT & snatch all the disgruntled customers up... Link to comment Share on other sites More sharing options...
YLD-11Z Member 178 Member For: 16y 11m 6d Gender: Male Location: Canberra Posted 30/01/09 05:19 AM Share Posted 30/01/09 05:19 AM Sniper & HP Tuners both offer similar software so don't be too quick to buy a XCAL3 mate. Granted, SCT are much more advanced but they have been around longer. If HPT & Sniper are smart they'll step up their game & develop their software to the likes of SCT & snatch all the disgruntled customers up...yeah but are they going to step up their game by next week?? I very much doubt it, my car has been being built for the past 3 months and will be ready next week, im not going to wait any longer for other companies to get their act together. Obviously my situation is different to others but I may be forced to buy one of these fing xcal3's just to get my car back on the road... Link to comment Share on other sites More sharing options...
F6 RAPID Formerly Turbo6 Donating Members 2,332 Member For: 21y 11m 20d Location: North Brisbane Posted 30/01/09 05:43 AM Share Posted 30/01/09 05:43 AM The new Distributor seems unable to make a G6E turbo much quicker than standard (if at all) if that Motor magazine was anything to go by............. Link to comment Share on other sites More sharing options...
Erko Donating Members 1,079 Member For: 21y 2m 26d Gender: Male Location: Sydney Posted 30/01/09 05:47 AM Share Posted 30/01/09 05:47 AM as is always the case with those Herrod specials in Motor........lame and expensive Link to comment Share on other sites More sharing options...
TornadoJudd Donating Members 818 Member For: 18y 10m 13d Posted 30/01/09 05:49 AM Share Posted 30/01/09 05:49 AM I read that review in Motor wha ta joke I would be ashamed if I was Herrod Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 6m 5d Gender: Male Posted 30/01/09 05:52 AM Share Posted 30/01/09 05:52 AM but it had 430 kw!!!!!!!/sarcasm Link to comment Share on other sites More sharing options...
kevo Member 286 Member For: 17y 11d Gender: Male Location: Wanneroo, Perth WA Posted 30/01/09 05:55 AM Share Posted 30/01/09 05:55 AM so back to the discussion... my flashtuner 2 is good untill december, then it will become a door stopper? Link to comment Share on other sites More sharing options...
Guest Guests Posted 30/01/09 06:13 AM Share Posted 30/01/09 06:13 AM (edited) Your Flash2 is already a paper weight.My email discussion with Charley Mahoney...Read from the bottom of the pageOne way or another we’ll get you taken handled. Please stay in contact with your dealer Monsta Torque as a plan will roll out by Monday,.Charlie MahoneyNational Sales Manager976 Florida Central ParkwayUnit 136Longwood, FL 32750407-774-2447 ext 111 voice321-363-7969 Direct407-260-6275 faxFrom: Dean.Burtoft@unitedgroupltd.com [mailto:Dean.Burtoft@unitedgroupltd.com] Sent: Friday, January 30, 2009 12:26 AMTo: Charlie MahoneySubject: RE: XCAL1 & XCAL2 units???I heard that 1 dealer is offering a $100 trade but I just paid $750 about 5 or 6 weeks ago. Monsta Torque are tuning...Dean BurtoftUGL Transport & SystemsAutomation, Defence & Maintenance Lot 30 Thorpe WayKwinana WA 6167AustraliaDirect: +61 8 9411 4705Facsimile: +61 8 9439 4921Mobile: +61 430 556 380Dean.Burtoft@unitedgroupltd.comwww.unitedgroupltd.comCharlie Mahoney <charlie@sctflash.com> 30/01/2009 02:22 PM To "Dean.Burtoft@unitedgroupltd.com" <Dean.Burtoft@unitedgroupltd.com> cc Subject RE: XCAL1 & XCAL2 units???I know that AU dealer may be offering a trade in to the X3. Who will you have do your tuning and how soon? Charlie Mahoney National Sales Manager 976 Florida Central Parkway Unit 136 Longwood, FL 32750 407-774-2447 ext 111 voice 321-363-7969 Direct 407-260-6275 fax From: Dean.Burtoft@unitedgroupltd.com [mailto:Dean.Burtoft@unitedgroupltd.com] Sent: Friday, January 30, 2009 12:10 AMTo: Charlie MahoneySubject: RE: XCAL1 & XCAL2 units??? I purchased my first XCAL1 from ebay, my second XCAL1 from CV Performance in NSW, then my XCAL2 from my tuner Monsta Torque here in WA. Do you think some sort of trade scheme might be put in place at some point? I am booked in for a retune in 3 weeks due to having an exhaust & larger injectors fitted, how should I tackle that? I can't afford the $1000 extra on top of tuning & hardware that you expect me to pay by purchasing a XCAL3???Dean BurtoftUGL Transport & SystemsAutomation, Defence & Maintenance Lot 30 Thorpe WayKwinana WA 6167AustraliaDirect: +61 8 9411 4705Facsimile: +61 8 9439 4921Mobile: +61 430 556 380Dean.Burtoft@unitedgroupltd.comwww.unitedgroupltd.comCharlie Mahoney <charlie@sctflash.com> 30/01/2009 02:05 PM To "Dean.Burtoft@unitedgroupltd.com" <Dean.Burtoft@unitedgroupltd.com> cc Subject RE: XCAL1 & XCAL2 units???It’s our software key. In the event you had a customer that had to get their vehicle handled, I would take care of it for you. The main stance is to show that we want all the x1 boxes out of the US , UK, AU, and NZ. But like I mentioned in my post we are working to get those that need tuning assisted. Where did you purchase your flash 1 from? Charlie Mahoney National Sales Manager 976 Florida Central Parkway Unit 136 Longwood, FL 32750 407-774-2447 ext 111 voice 321-363-7969 Direct 407-260-6275 fax From: Dean.Burtoft@unitedgroupltd.com [mailto:Dean.Burtoft@unitedgroupltd.com] Sent: Friday, January 30, 2009 12:02 AMTo: Charlie MahoneySubject: RE: XCAL1 & XCAL2 units??? I'm not a dealer I'm a customer, therefore no boxes inhouse & none in circulation. What's a Dongle?Dean BurtoftUGL Transport & SystemsAutomation, Defence & Maintenance Lot 30 Thorpe WayKwinana WA 6167AustraliaDirect: +61 8 9411 4705Facsimile: +61 8 9439 4921Mobile: +61 430 556 380Dean.Burtoft@unitedgroupltd.comwww.unitedgroupltd.com Charlie Mahoney <charlie@sctflash.com> 30/01/2009 01:00 PM To "Dean.Burtoft@unitedgroupltd.com" <Dean.Burtoft@unitedgroupltd.com> cc Subject RE: XCAL1 & XCAL2 units???Did you not read the last email? I think the first paragraph clears a lot of your worries up. Who did you purchase your software from? What is your dongle code? How many boxes do you have in circulation? How many boxes do you have In house? Please get back with me on this. Charlie Mahoney aka “some clown” National Sales Manager 976 Florida Central Parkway Unit 136 Longwood, FL 32750 407-774-2447 ext 111 voice 321-363-7969 Direct 407-260-6275 fax From: Dean.Burtoft@unitedgroupltd.com [mailto:Dean.Burtoft@unitedgroupltd.com] Sent: Thursday, January 29, 2009 10:56 PMTo: Charlie MahoneySubject: RE: XCAL1 & XCAL2 units??? I don't want a bigger screen & more memory... My Flash2 is fine for my purposes yet you're taking my right to use it away? I was never advised when purchasing it that some clown in a different country could just end the capabilities of it over night with the flick of a switch! If someone has cracked your software & is misusing your product then take it up with them or take them to court. Don't penalise the consumers who have done nothing wrong. The $750 I spent on the flash2 will be the last of my money you see as I'm not forking out $1000AUD for something that does exactly what my current box does with larger screen & more memory. The least you could do is offer a changeover price to people that already payed for your old products??Dean BurtoftUGL Transport & SystemsAutomation, Defence & Maintenance Lot 30 Thorpe WayKwinana WA 6167AustraliaDirect: +61 8 9411 4705Facsimile: +61 8 9439 4921Mobile: +61 430 556 380Dean.Burtoft@unitedgroupltd.comwww.unitedgroupltd.com Charlie Mahoney <charlie@sctflash.com> 30/01/2009 12:48 PM To "Dean.Burtoft@unitedgroupltd.com" <Dean.Burtoft@unitedgroupltd.com> cc Subject RE: XCAL1 & XCAL2 units???SCT is interested in resolving all concerns. We will work directly with each dealer to ensure that a solution is available. This latest change in the software it to prevent piracy and keep those from unlocking devices and using them over and over again. SCT apologizes to all affected however, this change had to be implemented in an effort to stop others from exploiting tools used to help customers. We hope that you continue to support your local dealers and distributors. Please rest easy knowing that the precautions we have taken on the X3 will ensure that this never happens again. If you have a flash 1 or flash 2, your devices can still switch between tunes but will not longer be custom tunable via software. Moving forward, you will be able to purchase the X3 and Livewire (ST225 applications) through authorized retailers and dealers only. The new devices give you the same features as the flash 1 and 2 with more memory, a larger screen, and on device data logging not to mention many additional parameters. Charlie Mahoney National Sales Manager 976 Florida Central Parkway Unit 136 Longwood, FL 32750 407-774-2447 ext 111 voice 321-363-7969 Direct 407-260-6275 fax From: Dean.Burtoft@unitedgroupltd.com [mailto:Dean.Burtoft@unitedgroupltd.com] Sent: Thursday, January 29, 2009 10:46 PMTo: Charlie MahoneySubject: XCAL1 & XCAL2 units??? Hi Charlie, After owning two XCAL1 & a XCAL2 flash box, I'd say I was a pretty loyal SCT customer seeing as there are other tuning options available to me & my car. I only recently purchased my XCAL2 & am now being told it is obsolete? Why is this?? Is there going to be some kind of reimbursment from your company to help me upgrade 'AGAIN' to your new model? If not, I see this as a very bad move on your part as SCT will be forgotten for the likes of HP Tuners & Sniper in the future by many people I have had contact with including my tuner... Regards,Dean BurtoftUGL Transport & SystemsAutomation, Defence & Maintenance Lot 30 Thorpe WayKwinana WA 6167AustraliaDirect: +61 8 9411 4705Facsimile: +61 8 9439 4921Mobile: +61 430 556 380Dean.Burtoft@unitedgroupltd.comwww.unitedgroupltd.com Edited 30/01/09 06:13 AM by 03XR6T Link to comment Share on other sites More sharing options...
Adrian6T T.P.I.S. Donating Members 2,578 Member For: 20y 25d Gender: Male Location: SoR, WA Posted 30/01/09 06:24 AM Share Posted 30/01/09 06:24 AM Interesting. Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 4m 9d Gender: Male Location: Zombie Birdhouse Posted 30/01/09 06:28 AM Share Posted 30/01/09 06:28 AM The software has a online update built into it. You have to keep updated or else you run out of "flash burns" which decrement everytime you upload a tune to a box..So 300 flashes aren't going to last long. I think some people still are thinking 300 tunes. Goooorne in no time Link to comment Share on other sites More sharing options...
Recommended Posts