Flashtune Trouble

[xr6t xr6t]

please help me

ive had this car for 3 months and the flash tuner came with it

the problem is that there are only 2 settings, f and the first 1

I wanted to change it to factory but the car would not start

can someone tell my why it wont start,

why only 2 settings

if it is safe to get ford to service it with the car running on program 1 10psi

and I have a dyno comp on saturday

my mods are:

intercooler

injectors

pump

wastegate actuator upgrade

crossover

under battery intake

Edited 12/01/09 01:04 PM by xr6t xr6t

[wiresquire]

I would say that the 'problem' with flashing the factory tune is your mods. Eg, the factory tune won't cope with injectors etc. If you change everything (well, you can probably leave intake and IC) back to stock, the factory tune will probably work.

ws

[ZAP]

Your best bet is to get the car custom tuned just to make sure the car is tuned correctly.

Once you change injectors, you cannot run the factory tune as the F tune is set for factory injector scales and will severly over fuel the motor.

[xr6t xr6t]

what about when ford service it will they stuff my tune

[tab]

If they update the software then yes, but just let them know not to. Perhaps a sticker across fuse panel cover as well to the effect of :angel:

[xr6t xr6t]

thanks but y only 2 settings not 4

[PHANTMXR6]

Whoever did the original tune probably only uploaded one tune to the box.

Factory and custom.

[BFHOON]

because you only have 1 tune in your box and running larger injectors leeds me to belive that it may be a custom tune. most generics have all 3 slots filled with valet 8 and 10 psi.

Edited 13/01/09 06:19 AM by BFHOON

[sensoryamusia]

you're not waiting long enough to set the tune in mate.

when the lights are going 1....2...3...4.... wait, then they will start to blink, wait again.....then they will stop.

try that first!

[xr6t xr6t]

thanks but I did that ill just tell them not to pley with the computer