Stock Xr6 Turbo Dump Pipe

[boost_lover]

hi, im turbo charging my ba na motor, and was wondering, how the stock dump pipe stacks up to an aftermarket one. Would an aftermarket one be ok, or an aftermarket dump will reap big rewards?

[XR06T]

people have made big power with the stocker, but aftermarket dumps definatly do give you an improvement. I think csv_ls1 ran 10.8 on the stock dump.

[Guest]

Pretty sure he had aftermarket dump, cat, exhaust etc

You might as well go aftermarket seeing as you'll have to buy a stocker anyways. Bigger dump helps to spool quicker & reduces back pressure on valve springs which would be of benifit to your NA head I'd amagine

[boost_lover]

Pretty sure he had aftermarket dump, cat, exhaust etc

You might as well go aftermarket seeing as you'll have to buy a stocker anyways. Bigger dump helps to spool quicker & reduces back pressure on valve springs which would be of benifit to your NA head I'd amagine

well the stock na valve springs will suffer the same fate as stock turbo valve springs. I have been offered stronger valve springs.

[mic]

doesnt FSIX run 9 with a stocker ?

edit, my bad.

Edited 06/01/09 08:59 AM by mic

[boost_lover]

in saying that, does anyone know where to get a cheap exhaust from dump back? Im in the liverpool area.

Edited 06/01/09 11:48 AM by boost_lover

[kevo]

I have a 3" dump pipe on mine, its the APS 3" but its pretty much identical to the stocker though if that helps,

bigger dump pipe means bigger numbers up the top of the rev range in more extreme power ranges