kevo Member 286 Member For: 17y 1m 1d Gender: Male Location: Wanneroo, Perth WA Posted 23/12/08 09:28 AM Share Posted 23/12/08 09:28 AM (edited) Hey guys.I have finally got myself into the 300 club after sitting on 280 for too long!I fit a RAP1D's V.2 cooler and piping kit in my garage, this is good gear. Fitting turned out to be not as long or hard of a job I thought it would be! This equipment fit real easy with just a bit of trimming, and piping was as simple as 'push in and tighten the clamp"! The only mod I did to this gear was TIG in a 1/4" BSP thread underneath the cold side piping so to retain the factory boost gauge sender unit as I want to keep the factory look in the cabin.standard setupAll the small piping replaced, that's a lot of crapMaking adjustments to fit the UBP. It didn't feel right cutting into my car at allRapids setup lifted into placeAll plumbed upNew piping setupAt the same time I gutted the APS cat as the core had shifted and crushed at the back. this turned out to be a bad BAD decision.It was limped it to Simons workshop at Xtreme Ford Tuning to have the walbro intank fitted and be tuned, on the initial run he realised that it was over boosting to around 18PSI with 344rwkw!!!!!! (I have factory internals so this was bad)I then had the bigger wastegate mod done to get it down to safe boost and still had overboost issues (thanks to a lack of a cat......), but after Simons mates fitted one of his XFT high flow cats boost was normal and he managed to pull 336.5rwkw on the rollers!!! On the rollers at the XFT workshopNiceIm real happy with the ute now, its real strong on the road and I have tyres that need changing already.Cheers to Simon and Mike and the guys from Extreme Ford Tuning for helping me out, I really appriciate it. Edited 24/12/08 11:38 PM by Dagabond Link to comment Share on other sites More sharing options...
typhoon_freak Cryptic Clothing Company Donating Members 4,556 Member For: 16y 6m 7d Gender: Male Location: Brisvages, Capalaba Posted 23/12/08 09:40 AM Share Posted 23/12/08 09:40 AM nice mate... very nice.. cant wait to fit my kit Link to comment Share on other sites More sharing options...
EZ2CME Formerly XR6NA Member 3,512 Member For: 19y 1m 18d Gender: Male Location: Brisbane Posted 23/12/08 12:05 PM Share Posted 23/12/08 12:05 PM Very nice, have fun. Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 7m 29d Gender: Male Location: Sydney NSW Posted 23/12/08 11:09 PM Share Posted 23/12/08 11:09 PM Good job mate... it can seem like a huge job when you look at all the pipes and stuff spread out all over the bench, but isnt too hard once you get into it.Nice power there too, enjoy. Link to comment Share on other sites More sharing options...
roocrew Member 3 Member For: 16y 25d Posted 24/12/08 12:57 AM Share Posted 24/12/08 12:57 AM excellent work towel Link to comment Share on other sites More sharing options...
mic Donating Members 1,725 Member For: 16y 11m 30d Gender: Male Posted 24/12/08 01:28 AM Share Posted 24/12/08 01:28 AM yeah nice mate, sweet power curve ! Link to comment Share on other sites More sharing options...
Guest Guests Posted 24/12/08 03:41 AM Share Posted 24/12/08 03:41 AM (edited) Well done Simon, good to see you getting some top results with the Rapid kit. They seem to be one of the best BFB kits on the market at the moment! See you at MV with a beer in your hand Edited 24/12/08 11:26 PM by Dagabond Link to comment Share on other sites More sharing options...
RIPGMH Donating Members 302 Member For: 20y 6m 9d Gender: Male Location: Sydney Posted 24/12/08 05:27 AM Share Posted 24/12/08 05:27 AM Well done on your own instalation and on the selfless act of posting pictures for others to see,enjoy Link to comment Share on other sites More sharing options...
SpudMuffin Member 83 Member For: 21y 1m 10d Location: Joondalup, WA Posted 24/12/08 10:52 PM Share Posted 24/12/08 10:52 PM I've been taking Kevo's car back and forward to XFT for the past couple of week getting bits and pieces done, Simon, Mike and the guys are really helpful and know their stuff!!This is a vid I took on my phone when the car was having overboost issues and let me assure you, in real life the car sounded like the RAAF making an extra low pass!!Link to vid (Right click Save As) Link to comment Share on other sites More sharing options...
kevo Member 286 Member For: 17y 1m 1d Gender: Male Location: Wanneroo, Perth WA Posted 25/12/08 04:05 AM Author Share Posted 25/12/08 04:05 AM I've been taking Kevo's car back and forward to XFT for the past couple of week getting bits and pieces done, Simon, Mike and the guys are really helpful and know their stuff!!yep cheers for that Pat, there would have been a LOT of tilt tray bills over the last month or so without your help as I work a 5 ans 2 roster so im never home on week days, I owe you a few drives for sure!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now