senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 25d Gender: Male Location: SW Sydney Posted 08/12/08 11:25 AM Share Posted 08/12/08 11:25 AM how come you have a BA front bar? Link to comment Share on other sites More sharing options...
BOZZTURBO Donating Members 237 Member For: 18y 6m 4d Gender: Male Location: Melbourne Posted 08/12/08 11:52 AM Share Posted 08/12/08 11:52 AM with just a tune 272rwkw, and no other mods is it possible . Link to comment Share on other sites More sharing options...
TEDracing Member 321 Member For: 16y 6m 6d Gender: Male Location: in a house or shed Posted 08/12/08 12:00 PM Share Posted 08/12/08 12:00 PM how come you have a BA front bar?Hi and if you have the BF front bar do you wanna sell it? Link to comment Share on other sites More sharing options...
benzau Member 38 Member For: 16y 2m 28d Posted 08/12/08 12:46 PM Author Share Posted 08/12/08 12:46 PM Hi and if you have the BF front bar do you wanna sell it?Car was in a minor frontend accident at some stage with previous owner.. I presume the BA bar was cheap / available.. At the rate its going itll be destroyed soon and ill go the BF one Link to comment Share on other sites More sharing options...
Kimberley Scott www.australianflag.org.au Donating Members 6,763 Member For: 19y 6m 16d Gender: Male Location: Brisbane Posted 08/12/08 01:17 PM Share Posted 08/12/08 01:17 PM 300rwkw is about right on a FG F6 with tune only. Just before you go in to hard. Also gald to hear of another option, but what makes them the best?Scotty Link to comment Share on other sites More sharing options...
XF Falcon <put funny sh*t here> Member 3,365 Member For: 18y 2m 24d Gender: Male Location: Perth, NOR Posted 08/12/08 05:40 PM Share Posted 08/12/08 05:40 PM my car (BF I 6spd auto) made 270 rwkw with only phoon cai and k&n so this seems about right to me. Then I put in bigger injectors/fuel pump and it made 280 but it made way more torque and the power delivery was way better. Then I went all out and did the plazmaman kit and that, but that's a different story. Link to comment Share on other sites More sharing options...
Guest Guests Posted 09/12/08 01:51 AM Share Posted 09/12/08 01:51 AM (edited) 90% duty on the injectors is getting on the'very unsafe' side of things mate so I'd be swapping them out asap before it ends in tears!15psi would be about right for that power level & those mods Pat due to the restrictive exhaust, standard cooler & factory crossover etc. Once they are replaced, the same power could be produced on much lower boost...Nice result though mate & enjoy it Was it run in Shoot6f mode on the dyno?? Doesn't look like it from the printout but could be wrong Edited 09/12/08 01:53 AM by 03XR6T Link to comment Share on other sites More sharing options...
Pube Member 159 Member For: 17y 8m 19d Gender: Male Location: Sydney, NSW Posted 09/12/08 11:30 AM Share Posted 09/12/08 11:30 AM Im amazed in how much dynos vary. I had my BF ZF on a dyno recently and it made 200rwkw stock and up to 240rwkw. A friend had his wrx on 2 different dynos. On one it made 195atw and another 160atw same mods. I guess the real story can be told on the track Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2m 2d Gender: Male Location: Melbourne Posted 09/12/08 12:12 PM Share Posted 09/12/08 12:12 PM Hence, dyno's are a tuning tool and lap times and 1/4 mile times are your bragging rights... REAL times that is Link to comment Share on other sites More sharing options...
Trough Lolly Member 4,349 Member For: 20y 4m 24d Gender: Male Location: Mildura Posted 09/12/08 01:15 PM Share Posted 09/12/08 01:15 PM but the 1/4 never lies!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now