Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 9m 12d Gender: Male Location: adelaide hills- 'race air' central Posted 05/12/08 01:12 AM Share Posted 05/12/08 01:12 AM hey guys,just fitting a rapid cooler on my ba. when its finished I assume I need to idle down to my tuner and get the flash remapped.just read another thread on here where someone fitted a big cooler and then took it for a flogging! isnt this dangerous, cause it would likely be running lean and stuff valves??? I assumed I needed to keep it REALLY low on revs till fuel maps are sorted. although it would be tempting to see what difference it makes! Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 21d Gender: Male Location: SW Sydney Posted 05/12/08 01:19 AM Share Posted 05/12/08 01:19 AM There is alot of debate over this, I fitted a bigger cooler and had no issues, where-as some people will tell you they get all sorts of issues.To be safe, drive it down to your tuner asap, and don't give it a real flogging. If you have a boost gauge fitted keep an eye on boost levels Link to comment Share on other sites More sharing options...
Pube Member 159 Member For: 17y 9m 15d Gender: Male Location: Sydney, NSW Posted 05/12/08 07:49 AM Share Posted 05/12/08 07:49 AM I fitted a Hdi intercooler kit on my BF that used a complete cold side, thus eliminating the standard under battery pipe. I gave it a bit and felt it was boosting much more than it use to. Then I got the 'engine check' light on the dash which I assume is an overboost error. Just dont drive it too hard on the way to the tuner. Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 9m 12d Gender: Male Location: adelaide hills- 'race air' central Posted 05/12/08 08:01 AM Author Share Posted 05/12/08 08:01 AM well its all done :angel: took it for a easy cruise, then took revs, boost etc a bit higher. seemed fine ecxept for 2 hoses blew off (on separate runs). popped them back on and retightened the clamps (they were tight... now theyre really tight). it all runs well, was custom tuned previously, so now off to the tuner for a new cat, big injectors and a retune. hopefully ill be joining the 300 club real soon. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now