F6 Motor Or Forged Pistons

[senna_T]

The F6 short motors have gone up a bit - around $2700 now I think.

If you haven't put a hole in your block, I would suggest an Atomic rebuild kit for around $3500 you can have a bottom end you can lean on and be confident

[BFHOON]

would you pay 10k drive in drive out for a guarenteed full build from a popular but un named supplier.

[wilba]

ummm $10k is a lot of coin and I dnt have that much money mate I was saving for just the usual to get about 320rwkw now my engine is rat sh*t so I wil c wat happens

[wilba]

wat does that include cheers

  senna_T said:

The F6 short motors have gone up a bit - around $2700 now I think.

If you haven't put a hole in your block, I would suggest an Atomic rebuild kit for around $3500 you can have a bottom end you can lean on and be confident

[senna_T]

The re-build kit contains Pistons (including rings and gudgeon pins), rods, all bearings, run in oil and oil filter. At that price it is the 660kw rated version

Edited 02/12/08 10:49 AM by senna_T

[wilba]

ok and do I get it through them or a performance shop

[F6 UTE]

You need to get the block machined, the head serviced etc when doing a build.

Expect another $2-3K for that depending on what level of machining you get.

Get an F6 short.

[TOM1111]

if your after 320kw just go the F6 short

[Worm]

How did you go with your car mate?

Any news? Hope its not too bad.

Worm

[wilba]

yea they have only taken the sump off so far but in the sump were shavings so that carnt b good there stripping it tomoz