xradam Member 43 Member For: 16y 10m 28d Gender: Male Location: Gold Coast Posted 17/11/08 12:43 AM Author Share Posted 17/11/08 12:43 AM (edited) Very good result on shoot8f.Have you got a run on shoot6f, for a comparison, as it uses a very different ramp rate?I find it more useful to get the display in rpm rather than road speed.Are you still using the 3.45 diff?With these cars anything over 500rwkw is going to be super strong.BrianThe reason it wasn't run on 6F was due to wheelspin as it comes on boost, this car on the street will accelerate at or above a eight cylinder with forced induction anyway so it is an actual comparision. The only reason the boys put road speed on the dyno chart was to show that it is in 4 gear which will match the as the diff gears are 3:7 I believe the was originally a tray back xr6t, That was reving to 6300rpm but is now making 620rwhp on pump 18psi reving to 7000rpmWould love to see your entire list of modifications done to your ute please. Could you also add a pic of your engine bay please. look forward to seeing your postAndrewHere we go Hi-Torque Performance have done the complete build!CP pistonsFat RodsStd crankshaftCometic head gasketHead stud and main studsAtomic oil pumpAtomic balancerAtomic CamshaftsAtomic valve springsPlaz plenum and intercooler 1000hp3inch piping hot and cold side870cc injectorsstd fuel rail modifiedtwin 044 bosch pumpMotec 600TAS Performance manifoldTurbosmart gate 60mm4inch exhaust no catSTD throttle bodyNPC twin plate clutchSTD T56Eboost 2Garret GT42 (1200hp)420rwhp on pump 7psi540rwhp on pump 14psi620rwhp on pump 18psi800+rwhp on MAXNOS 28psi 30+ PSI YET TO COME (soon)What driveline set up do you have? Awesome result mate!std Edited 17/11/08 12:43 AM by xradam Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 21y 10m 12d Gender: Male Location: Sydney Posted 17/11/08 01:20 AM Share Posted 17/11/08 01:20 AM The reason it wasn't run on 6F was due to wheelspin as it comes on boost, this car on the street will accelerate at or above a eight cylinder with forced induction anyway so it is an actual comparision. The only reason the boys put road speed on the dyno chart was to show that it is in 4 gear which will match the as the diff gears are 3:7 I believe the was originally a tray back xr6t, That was reving to 6300rpm but is now making 620rwhp on pump 18psi reving to 7000rpmAgreed.I have also found that shoot6f does not work very well as power levels increase, especially when you have big turbos.Shoot8f ramp rate will favour forced V8's compared with shoot6f that is generally used for our turbo cars.All my base tuning is done with a hub dyno; if I run on a dd dyno and use rpm I can determine the amount of wheel slip that I have by comparing the graphs; I can't if road speed is used, as wheelslip is not a constant. Well done!Brian Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 3m 13d Gender: Male Location: Victoria Posted 17/11/08 04:55 AM Share Posted 17/11/08 04:55 AM And here I was happy with my 350... Then I see 600+... WTF???Nice work... And it is running a stock t56??? Seem to be holding up ok...? Link to comment Share on other sites More sharing options...
xradam Member 43 Member For: 16y 10m 28d Gender: Male Location: Gold Coast Posted 17/11/08 05:37 AM Author Share Posted 17/11/08 05:37 AM and here's a pic with the new turbo Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 9m 14d Gender: Male Location: Dianella, West Oz Posted 17/11/08 05:46 AM Share Posted 17/11/08 05:46 AM Well....... Bugger me!Got turbo or wot hahaha... Im suprised the bonnet closes lol.Just make sure you dont wind it up in any residential areas. Wouldnt want any small children or domestic pets getting sucked up and going missing now would we! Link to comment Share on other sites More sharing options...
Dagabond Bored Member Administrator 35,722 Member For: 21y 11m 22d Gender: Male Location: Dé·jà vu Posted 17/11/08 06:54 AM Share Posted 17/11/08 06:54 AM That'd suck harder than Pammie Anderson.... Link to comment Share on other sites More sharing options...
typhoon_freak Cryptic Clothing Company Donating Members 4,556 Member For: 16y 3m 26d Gender: Male Location: Brisvages, Capalaba Posted 17/11/08 07:02 AM Share Posted 17/11/08 07:02 AM any idea of what it wud do down the 1/4? must say.. looks awsome with the bigger turbo.. when does it kick in? Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 2m 25d Gender: Male Location: Melb Posted 17/11/08 08:31 AM Share Posted 17/11/08 08:31 AM nice work.. I see a motec has been thrown in for good measure..Whats your cold start, and idle quality like? Link to comment Share on other sites More sharing options...
phatal Member 205 Member For: 16y 9m 20d Gender: Male Location: Poxby Downs, SA Posted 17/11/08 09:54 AM Share Posted 17/11/08 09:54 AM Wow that looks awesome! How is the air filtered? Link to comment Share on other sites More sharing options...
JP300 Donating Members 842 Member For: 19y 1m 23d Gender: Male Location: Sydney Posted 17/11/08 10:57 AM Share Posted 17/11/08 10:57 AM Awesome looking setup... Congratulations to all involved. It looks like it comes on nice and gentle through the rev range. So the 607 rwkw was on NOS @ 28 psi? What is MaxNOS? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now