Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 4m 22d Gender: Male Location: South West QLD Posted 06/01/13 05:37 AM Share Posted 06/01/13 05:37 AM Who cares?? I remember many people talking about exhaust leaks and chit.. It's always the diff bush! J@ you used to know this! Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 22d Gender: Male Location: Adelaide Posted 06/01/13 05:38 AM Share Posted 06/01/13 05:38 AM Iam slipping in my furry age Link to comment Share on other sites More sharing options...
HYPEDF6 Donating Members 301 Member For: 12y 14d Gender: Male Posted 06/01/13 07:34 AM Share Posted 06/01/13 07:34 AM Front and rear 1 hour 48 mins , hoist and air tools made my life soooooo easy. :D 1 Link to comment Share on other sites More sharing options...
Bulletime Donating Members 937 Member For: 13y 11m 14d Gender: Male Posted 06/01/13 07:46 AM Share Posted 06/01/13 07:46 AM Got a full set of pedders sports Ryder installed yesterday. , what an insane difference, all bushes replaced with super pro gear, rear diff centre and sides done as well Handles like a Subaru now! Oh yeh I did 4getz +4 hrs for diff bush then I swear the op is talking about just shocks and springs ....... I was responding to this guy saying he got it all for 2k, inc bushes done, couldn't see how he got it so cheap with all the labour for the rear bushes. op was just springs and shocks though your right. All good Link to comment Share on other sites More sharing options...
old_mate Member 767 Member For: 18y 10m 9d Gender: Male Location: Brisbane Posted 06/01/13 10:01 AM Share Posted 06/01/13 10:01 AM I pay less than $250 labour each time my friendly Ford dealer drops my cradle - has been out twice now to first do side bushes, then out again last week for control arm and center bush.I don't think it actually takes that long when you know what you're doing. 1 Link to comment Share on other sites More sharing options...
HYPEDF6 Donating Members 301 Member For: 12y 14d Gender: Male Posted 07/01/13 12:44 AM Share Posted 07/01/13 12:44 AM Easy here is a couple of pics you might be able to get ideas from if doing the job. Link to comment Share on other sites More sharing options...
Seaton Donating Members 537 Member For: 12y 3m 25d Gender: Male Location: Sydney Posted 27/01/13 12:03 AM Share Posted 27/01/13 12:03 AM going to do this tomorrow,How much pressure is the spring under on the front of an FG? I will have access to a spring compressor but this is my only real concern. Does it need to be compressed alot? Thanks. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 22d Gender: Male Location: Adelaide Posted 27/01/13 12:47 AM Share Posted 27/01/13 12:47 AM Its got a bit behind it blOke so be cautious Get the compressors evenly 180o from each other and take them down until it feels quite firm Then u can release the top nut and then un wind the compressors evenly Job basically done 1 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 28d Gender: Male Location: Probably above atmospheric pressure Posted 10/03/13 01:40 PM Share Posted 10/03/13 01:40 PM Just fitted my new shocks and springs front and rear with help from here, now to take it for a small test drive and make sure nothing flies through the bonnet or hits the road at the rear! Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 28d Gender: Male Location: Probably above atmospheric pressure Posted 10/03/13 05:41 PM Share Posted 10/03/13 05:41 PM (edited) Great success on my BFII!The key to fitting rear springs is slowly jacking, as per diagram below showing resultant strut extension.Here's the rest of the relevant pics from over in my build threadPics of stock set up to remind myself of how the top sits for laterRear suspension:By the way don't let the brake lines get tight. I'm holding the caliper in this pic and it is not as tight as it may appear (that's what she said). Edited 10/03/13 05:46 PM by -SteveR- 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now