Tree Monkey Member 685 Member For: 17y 5m 3d Gender: Male Location: brisvagas / Manly Posted 17/10/08 05:06 AM Share Posted 17/10/08 05:06 AM dont forget to get a good set of oil pump gears.... IT IS A MUST for what you are doing. I am looking at hotting up my old motor that came out of the car origanaly. I have a customer/mate that ownes godzilla motor sports and is keen to help but he is talking one of 6boost manifolds, bigger turbo than the t04z 60mm waste gate fully fordged internals bla bla bla but I aint looking for a motor that will handle 500+rwkw like the gtr's he produces, I am looking at replacing only the rings, bearings,rods, pistons, oil pump gears, modding the turbo only not replacing it , plenum and surge tank. This will give me a strong motor good for 400rwkw+ as far as I can tell and on around 18-19lb boost. With the profec b boost controler I will have lo boost set at 10lb (320rwkw) hi boost 18lb (???rwkw) all on one tune and at the touch of a button. By the way complete 04 turbo motor with everything at a wrecker I know $3000 pm me if intersted. Link to comment https://www.fordxr6turbo.com/forum/topic/50652-building-a-40-dohc-turbo/page/3/#findComment-751134 Share on other sites More sharing options...
Azzman460 Azzman Member 223 Member For: 16y 9m 19d Gender: Male Location: Melbourne Posted 17/10/08 05:15 AM Share Posted 17/10/08 05:15 AM yeah with my setup I could push it as far as my fuel system, intercooler and turbo can go, the engine will handle all I wish to put through it before worrying about over revving the crank. I'm not looking for a dyno queen or drag monster, I think much like yourself, I just want a good streetable car that will smoke all the holdens I come across, leaving them at the lights. I could push over 400rwkw with the components I will eventually have on the car. AH its all fun and games, I love it! Link to comment https://www.fordxr6turbo.com/forum/topic/50652-building-a-40-dohc-turbo/page/3/#findComment-751136 Share on other sites More sharing options...
lukedohc Donating Members 141 Member For: 16y 6m 29d Posted 18/10/08 05:04 AM Author Share Posted 18/10/08 05:04 AM money is no issue with this project I qam going to buy a xr6t next year maybe f6 but I want to build this motor for exparance and as a hobbyso when I I get it I got a strong motor to chuck in it so I don't have the car in the garage all the time its not so fast when there is a rod sticking outside the block so I'm spending the cash so I can ramp it up when standard is not enough for all the mods Link to comment https://www.fordxr6turbo.com/forum/topic/50652-building-a-40-dohc-turbo/page/3/#findComment-751562 Share on other sites More sharing options...
XRSCAR Member 414 Member For: 17y 3m 3d Gender: Male Location: FTG, Victoria Posted 18/10/08 10:30 AM Share Posted 18/10/08 10:30 AM wish I had the money to do a project like this, just spending the time and learning all about the motor in your car would be fantastic.im pretty retarded when it comes to these things :Dgood luck with it luke! Link to comment https://www.fordxr6turbo.com/forum/topic/50652-building-a-40-dohc-turbo/page/3/#findComment-751736 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now