BlackXR6T Member 130 Member For: 18y 10m 29d Gender: Male Location: Newcastle Posted 19/10/08 09:35 AM Author Share Posted 19/10/08 09:35 AM feels good. throttle response alot better, more power. Happy with the kit Link to comment Share on other sites More sharing options...
pip_brendanAKAfrosty Member 108 Member For: 16y 6m 16d Gender: Male Location: brisbane Posted 20/10/08 08:11 AM Share Posted 20/10/08 08:11 AM (edited) f*ck yeah man that's awsome, I am hunting parts to something similar atm. hows the bov sound? and what els have u had done to make that kind of power, if u dont mind me asking? Edited 20/10/08 08:16 AM by pip_brendanAKAfrosty Link to comment Share on other sites More sharing options...
BlackXR6T Member 130 Member For: 18y 10m 29d Gender: Male Location: Newcastle Posted 21/10/08 03:59 AM Author Share Posted 21/10/08 03:59 AM its a turbosmart megasonic bov its pretty loud. The other mods include atomic valve springs, deka 60 pounders, 044 surge pump and tank and a walbro in tank. Modified flapper on turbo and a 9 psi acuator, 4 inch dump and cat with X-force system with quad tips, its a 6spd manual, its got an "extreme" heavy duty cluch. Link to comment Share on other sites More sharing options...
BOOSTINXR6 Member 12 Member For: 17y 3m 20d Posted 10/12/08 10:49 PM Share Posted 10/12/08 10:49 PM Hey mate, how do you find the extreme heavy duty clutch, is it heavy or a pig to drive compared to the stock clutch? What did it cost ya? And are you finding its slipping with that kind of power? Im in the market to grab a new clutch atm coz mines starting to slip @250kwts in 3rd and 4th.Also looking at grabbing a 800hp plazaman cooler, is there much difference between that cooler and the pics of the one you have posted.Anyone know what power these coolers are rated @ and what do they ususally go for?Was install a *beep*, Is there any cutting / grinding into the body to install the kit. Im after a cut with no cutting or grinding of the beast so no headaches off the cops and for road worthiness.Any help would be greatly appreciated Link to comment Share on other sites More sharing options...
Sleeper6T Member 356 Member For: 16y 5m 4d Gender: Male Location: Melbourne Posted 10/01/09 03:58 AM Share Posted 10/01/09 03:58 AM Nice job mate im also looking into the same kit. Spoke to Alex from Plazmaman and he recommended that I should upgrade the cooler to one of their pro series 1000hp units , which he said should pick up an easy 15 - 20 rwkws . He mentioned most of their customers are seeing 360-370 with that boost and their option 1 kit, if there is good hard ware on the car.I'm chasing about 390rwk and Nizpro do one that they call the "big big cooler". It still uses the same "intercooler but has a larger alloy cast end tank that takes a 63mm inside diameter hot side intercooler pipe", which is actually a rubber/kevlar replacement just bigger. Id also appreciate any feedback from those who have had this one done so as to compare.CheersBrad Link to comment Share on other sites More sharing options...
EXGMH304 Member 64 Member For: 16y 11m 21d Gender: Male Location: S.E Melbourne Posted 04/02/09 09:27 AM Share Posted 04/02/09 09:27 AM It's gorgeous... I want one!!! Link to comment Share on other sites More sharing options...
EXGMH304 Member 64 Member For: 16y 11m 21d Gender: Male Location: S.E Melbourne Posted 08/02/09 02:54 AM Share Posted 08/02/09 02:54 AM Quick question...Can I fit the cooler with the stock cross over plumbing?I'm looking to upgrade and want the whole kit eventualy, but can't afford it all right now.So I was hoping to do the cooler now, rest later? But it looks like it wont work? Link to comment Share on other sites More sharing options...
BlackXR6T Member 130 Member For: 18y 10m 29d Gender: Male Location: Newcastle Posted 01/04/09 11:12 AM Author Share Posted 01/04/09 11:12 AM hey sorry, I havnt been replying, I havnt been online in a while. sleeper6t, my car is tuned to 350rwkw. which is the absolute limit of my motor. others have pushed them further without problems and some fail under less. I'm not 100% sure on what people are getting from these coolers.As for the extreme clutch, its finally on its way out. my stock clutch failed at 250kw also. Ive had it on my car with stock flywheel for approx 3 years at 311rwkw and above. I'm opting for a mal wood option 6 next for future engine mods.exgmh304, im not too sure on what plazmaman has to offer, but there are kits that retain the same plenum and remove the cross over. that might be your best option, or you may be able to get another brand kit too suit.CheersJosh Link to comment Share on other sites More sharing options...
01txr Member 861 Member For: 18y 1m 14d Gender: Male Location: QLD Posted 01/04/09 01:40 PM Share Posted 01/04/09 01:40 PM Just wondering about the Aircond fitting which is attached to the condensor, just fitted a HDI cooler and it was the only thing stopping me from moving the cooler towardsthe left hand side. So my cooler sits slightly off center.The Plazmaman cooler looks as wide so how did you get it to sit central. Link to comment Share on other sites More sharing options...
CHLAXN Donating Members 932 Member For: 16y 9m 6d Gender: Male Location: north QLD Posted 01/04/09 03:01 PM Share Posted 01/04/09 03:01 PM you have to bend it up out of the way to make room for the cooler.. that's the only way to get it to fit.. takes a bit of force too lol.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now