blue_xr6 Member 40 Member For: 16y 1m 6d Posted 07/10/08 03:49 AM Share Posted 07/10/08 03:49 AM Hi guys,When I start my BA XR6T, my airbag warning light is on for a few seconds then off (together with all other lights which is normal). However, when I start driving, it's blinking for a while then stay on. Has anyone here has the same problem and what causes it and how to fix it? Does it mean my airbags not working anymore or just the faulty on the warning light?The strange thing is that usually after put my car for the hand car wash and cleaning, I am not sure how they clean my interior but the light works normally after that for about a week then start on again.Any helps will be good. Link to comment Share on other sites More sharing options...
Mike XR6T iTs alL DaRDy........ Donating Members 780 Member For: 17y 2m 3d Gender: Male Location: Adelaide Posted 07/10/08 04:30 AM Share Posted 07/10/08 04:30 AM it indicates a fault in the airbag system, and it means the system is disabled. any auto elec with a scan tool should be able to access the fault memory and tell u the problem.cheers Link to comment Share on other sites More sharing options...
typhoon_freak Cryptic Clothing Company Donating Members 4,556 Member For: 16y 3m 29d Gender: Male Location: Brisvages, Capalaba Posted 07/10/08 07:42 AM Share Posted 07/10/08 07:42 AM also could be somthing wrong with your seatbelt.. theres a hell of a lot of wires n stuff under your drivers seat.. best option is to go down to ford and they will sort it out.. had the problem in my xr6 ute Link to comment Share on other sites More sharing options...
Ford_Power Member 798 Member For: 21y 7m 7d Posted 07/10/08 08:40 AM Share Posted 07/10/08 08:40 AM The warning light is blinking an error code. Tell me what code it blinks out, and I will tell you what it means.There are two digits from memory, and I think it repeats the code three times. Link to comment Share on other sites More sharing options...
GKTaylor Member 21 Member For: 16y 2m 21d Gender: Male Location: Pollok, Awhitu, NZ Posted 07/10/08 09:14 AM Share Posted 07/10/08 09:14 AM There are a few plugs under the drivers seat, one is the seatbelt sensor which works in conjunction with the airbag, the other is the seat rail, pull off the seat belt one and push it back on again, this may help conectivity in the plug (they are gold), takes only a small amount of resistance for these to fault, you will need to get your mechanic to clear the fault code, if you do pull both off the seat rail plug even registers a fault.This worked on mine, if that dosent help, confirm the fault code correctly and go from there. Link to comment Share on other sites More sharing options...
ENVY-T CNUTOX Donating Members 3,098 Member For: 21y 10m 2d Gender: Male Location: Not sure? Posted 07/10/08 11:33 AM Share Posted 07/10/08 11:33 AM + 1 for shawn the sheep ^^^above^^^. Mine has done it before and it always conicides with an interior clean. I play with the plugs under the seat and the light turns off. Link to comment Share on other sites More sharing options...
blue_xr6 Member 40 Member For: 16y 1m 6d Posted 07/10/08 12:33 PM Author Share Posted 07/10/08 12:33 PM Thanks for your help. I will try to look at the plugs tomorrow. But how can I find out the faulty code? Does it mean count how many times it blink before it stay on or how long does it take before stay on? Link to comment Share on other sites More sharing options...
ENVY-T CNUTOX Donating Members 3,098 Member For: 21y 10m 2d Gender: Male Location: Not sure? Posted 07/10/08 07:21 PM Share Posted 07/10/08 07:21 PM Count the blinks before it stays on. Link to comment Share on other sites More sharing options...
blue_xr6 Member 40 Member For: 16y 1m 6d Posted 08/10/08 03:27 AM Author Share Posted 08/10/08 03:27 AM I've just checked for the faulty code. My warning light blinks twice then stop for 1s, then 3 times and stop, then repeat twice,3 times for 5 times (I.e: 5 x 2+3 total of 25 times) before it stays on. So what is the code for it and how to fix it? Thanks. Link to comment Share on other sites More sharing options...
Tree Monkey Member 685 Member For: 16y 10m 30d Gender: Male Location: brisvagas / Manly Posted 08/10/08 03:40 AM Share Posted 08/10/08 03:40 AM (edited) code 23 Restraint System - Side Airbag Module Status (Passenger Side Side Airbag Circuit Fault)GO to Pinpoint Test I Edited 08/10/08 03:45 AM by Tree Monkey Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now