Jump to content

Bells To Bathurst Cruise


RHR

Recommended Posts

  • BOOST
  • Moderating Team
  • Member For: 21y 3m 21d
  • Gender: Male
  • Location: Southern Highlands NSW

Bells to Bathurst Cruise 19th October 2008

This cruise applies to all NSW Members :banghead:

In order for every body to have a good time, a few rules have been implemented. Failure to abide by these rules will ensure you are not invited to future events held by FordXR6Turbo.com.

The reasons for these rules are:

• Safety – We don't want to put any of our members, and the general public in any danger.

• Public Perception – We do not want the Ford XR6 Turbo community to face the same ridicule and stereotypes other car communities face

The rules are simple:

Obey all laws whilst on the cruise; this means no speeding, no overtaking over double lines (no matter how safe you think it may be), etc...Any breaches will be reported to the local police.

• There is a designated cruise leader who will lead the way and set the correct pace for all cruise members. There is also a designated cruise anchor that will stay at the back of the cruise. You must not overtake the cruise leader, or fall behind the anchor. If you have to stop or drop back for what ever reason, the anchor will stay back with you.

• Use the Buddy system; always make sure you can see the car behind you. This will give people behind you an indication on where to turn to make sure nobody gets lost.

• CB Radio's; if you don't have one, follow the maps, and directions given out. If you do have one, please limit chatter during the twisty parts of the cruise. This will allow the cruise leader to relay information about road conditions, upcoming obstacles, etc. efficiently.

• By attending this cruise you agree not to hold FordXR6Turbo.com, it's Administrators, Moderators, Cruise Organisers, or Owners responsible/liable for any damage and/or grief sustained (simply; if you stuff up it's your fault, not ours).

If you have any questions please do not hesitate to ask me on the day.

Details of the cruise and travel details

Meeting Point

BP Servo/ McDonalds which is located on the corner of Old Windsor Rd and Celebration Drive Glenwood. Its on the south bound side and every one needs to be there around 8.30am on Sunday morning

We will be driving on Bells Line of road all the way to Lithgo. From Lithgo we will head on to Bathurst for some laps. Now by time we'll be getting pretty hungry so we will be stopping for lunch at Panthers Bistro. So once we've stocked up back to the mountain for a final couple of laps then back we go to Sydney

I will hand out a cruise info sheet on the day. It will include directions

Now for the attendance list.

Robbo

Lord Cyric +1

ravenhard

onboost

iTec

rap1d

Butto

DRAXF6

Buf-Phoon

Turboboy

iconic bionic

Sofy

Dctodd

Our06t

Edited by revheadrobbo
Link to comment
Share on other sites

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

  • Just sit back and enjoy the ride...!
  • Donating Members
  • Member For: 21y 4m 2d
  • Gender: Male
  • Location: Sydney, NSW

Finally I'll be home on a weekend without having to repack to fly out somewhere else!

I'M THERE WITH THE STEREO PUMPING!!!! :3some:

Link to comment
Share on other sites

  • Member
  • Member For: 16y 8m 22d
  • Gender: Male
  • Location: Newcastle

Im heading out there for the Race weekend but not sure if ill back up and make it two weekends in a row haha. Would be fun though to do some laps once all the smoke has cleared :blush:

Link to comment
Share on other sites

  • BOOST
  • Moderating Team
  • Member For: 21y 3m 21d
  • Gender: Male
  • Location: Southern Highlands NSW

Ib ill put ya in when ya confirm

Ras351 come on man it will be a top week end

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'